期刊文献+

Aerodynamic optimization and mechanism design of flexible variable camber trailing-edge flap 被引量:12

Aerodynamic optimization and mechanism design of flexible variable camber trailing-edge flap
原文传递
导出
摘要 Trailing-edge flap is traditionally used to improve the takeoff and landing aerodynamic performance of aircraft.In order to improve flight efficiency during takeoff,cruise and landing states,the flexible variable camber trailing-edge flap is introduced,capable of changing its shape smoothly from 50% flap chord to the rear of the flap.Using a numerical simulation method for the case of the GA(W)-2 airfoil,the multi-objective optimization of the overlap,gap,deflection angle,and bending angle of the flap under takeoff and landing configurations is studied.The optimization results show that under takeoff configuration,the variable camber trailing-edge flap can increase lift coefficient by about 8% and lift-to-drag ratio by about 7% compared with the traditional flap at a takeoff angle of 8°.Under landing configuration,the flap can improve the lift coefficient at a stall angle of attack about 1.3%.Under cruise state,the flap helps to improve the lift-todrag ratio over a wide range of lift coefficients,and the maximum increment is about 30%.Finally,a corrugated structure–eccentric beam combination bending mechanism is introduced in this paper to bend the flap by rotating the eccentric beam. Trailing-edge flap is traditionally used to improve the takeoff and landing aerodynamic performance of aircraft.In order to improve flight efficiency during takeoff,cruise and landing states,the flexible variable camber trailing-edge flap is introduced,capable of changing its shape smoothly from 50% flap chord to the rear of the flap.Using a numerical simulation method for the case of the GA(W)-2 airfoil,the multi-objective optimization of the overlap,gap,deflection angle,and bending angle of the flap under takeoff and landing configurations is studied.The optimization results show that under takeoff configuration,the variable camber trailing-edge flap can increase lift coefficient by about 8% and lift-to-drag ratio by about 7% compared with the traditional flap at a takeoff angle of 8°.Under landing configuration,the flap can improve the lift coefficient at a stall angle of attack about 1.3%.Under cruise state,the flap helps to improve the lift-todrag ratio over a wide range of lift coefficients,and the maximum increment is about 30%.Finally,a corrugated structure–eccentric beam combination bending mechanism is introduced in this paper to bend the flap by rotating the eccentric beam.
出处 《Chinese Journal of Aeronautics》 SCIE EI CAS CSCD 2017年第3期988-1003,共16页 中国航空学报(英文版)
关键词 Aerodynamic optimization GA(W)-2 airfoil Mechanism design Trailing-edge flap Variable camber Aerodynamic optimization GA(W)-2 airfoil Mechanism design Trailing-edge flap Variable camber
  • 相关文献

参考文献5

二级参考文献62

  • 1LENTINK D, MULLER U K, STAMHUIS E J, DE KAT R, VAN GESTEL W, VELDHUIS L L M, HENNINGSSON P, HEDENSTROM A, VIDELER J J, VAN LEEUWEN J L. How swifts control their glide performance with morphing wings[J]. Nature, 2007, 446(7139) : 1082-1085.
  • 2ANDERSEN G, COWAN D, PIATAK D. Aeroelastic modeling, analysis and testing of a morphing wing strueture[R]. AIAA Paper, AIAA-2007-1734, 2007.
  • 3LOVE M, ZINK P, STROUD R, BYE D, RIZK S, WHITE D. Demonstration of morphing technology through ground and wind tunnel tests[R]. AIAA Paper [R]. AIAA-2007-1729, 2007.
  • 4HALL J M. Executive summary AFTI/F-111 mission adaptive wing[R]. WRDC-TR-89-3083, 1989.
  • 5PENDLETON E, FLICK P, PAUL D, VORACEK D, REICHENBACH E, GRIFFIN K. The X-53 a summaryof the active aeroelastic wing flight research program [R]. AIAA Paper, AIAA-2007-1855, 2007.
  • 6KUDVA J. Overview of the DARPA smart wing project [J]. Journal of Intelligent Material System and Structure, 2004, 15: 261-267.
  • 7MCGOWAN A-M R, COX D E, LAZOS B S, WASZAK M R, RANEY D L, SIOCHI E J, PAO P S. Biologicallyinspired technologies in NASA's morphing project[A]. Proceedings of SPIE-The International Society for Optical Engineering[C]. 2003, 5051: 1-13.
  • 8SMITH B L, GLEZER A. The formation and evolution of synthetic jets[J]. Physics of Fluids, 1998, 10(9) : 2281-2297.
  • 9MCMANUS K, JOSHI P B, LEGNER H H, DAVIS S J. Active control of aerodynamic stall using pulsed jet actuators[R]. AIAA Paper, AIAA-95-2187, 1995.
  • 10CHEN F J, BEELER G B. Virtual shaping of a two-dimensional NACA 0015 airfoil using synthetic jet actuator[R]. AIAA Paper, AIAA-2002-3273, 2002.

共引文献60

同被引文献43

引证文献12

二级引证文献49

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部