期刊文献+

基于VERICUT的车铣复合IT100建模和数控仿真研究 被引量:6

Modeling and Numerical Control Simulation Study of IT100 Based on VERICUT for Turning and Milling Compound
下载PDF
导出
摘要 针对车铣复合IT100机床机构复杂、程序繁琐、刀轴运动灵活,在实际加工过程中很难人为判断程序的正确性以及刀轴是否会与零件、工作台、夹具等发生碰撞、干涉等问题。提出首先在UG软件中根据机床各部件的实测尺寸进行建模,然后将其建好模型导入VERICUT软件中,并根据各部件的相对运动关系组建虚拟的仿真机床。在此虚拟的仿真机床上对诱导轮进行模拟仿真加工,最后通过在车铣复合IT100上对诱导轮的实际加工验证了其模拟仿真的正确性和实用性,同时也为其他多轴联动数控机床的数控仿真提供了一定的经验。 Aimed at the complex of the turning and milling compound IT100 machine tool, the procedure is tedious, the knife shaft movement is flexible. In the actual machining process difficult to procedures to determine the correctness, and if the cutter shaft is collision and interference problems with parts, a workbench, and a clamp. Firstly, according to the measured dimensions of each com- ponent of the machine tool in the UG software, the model was introduced into the VERICUT software, and the virtual simulation ma- chine tool is built according to the relative motion relationship of each component. In this virtual machine simulation of inducer for ma- chining simulation, finally, the in turning and milling compound IT100 inducer of the actual processing, the correctness and practica- bility of the simulation were verified. And some experience for other multi-axis linkage computer numbercial control ( CNC ) machine tool of CNC simulation is provided.
出处 《机床与液压》 北大核心 2017年第19期166-169,共4页 Machine Tool & Hydraulics
基金 德阳市2015年度重点科技计划(科技支撑计划 校企科技合作)项目(2015ZZ042)
关键词 VERICUT 车铣复合 建模 数控仿真 VERICUT Turning and milling compound Modeling Numerical control simulation
  • 相关文献

参考文献7

二级参考文献34

  • 1张惠林,轩继花,姜士湖.基于VERICUT的五轴联动数控加工仿真[J].现代制造工程,2006(7):125-127. 被引量:24
  • 2郑金兴,程慧群.基于UG NX 4.0整体叶轮的五轴数控加工仿真[J].组合机床与自动化加工技术,2007(4):87-90. 被引量:19
  • 3陈海舟.数控铣削加工宏程序及应用实例[M].北京:机械工业出版社,2007.
  • 4青春,李强,其木格.基于UG的数控编程及加工过程仿真[J].机械设计与制造,2007(8):107-109. 被引量:28
  • 5斯密德.FANUC数控系统用户宏程序与编程技巧[M].北京:化学工业出版社,2007.8.
  • 6H. K. Tonshoff. Optimal tool position for five-axis flank milling of arbitrary shaped surface,Nils Rackow, 1999.
  • 7Northern research and engineering corporation. Cutter-path generation for 5-axis flank millingof turbomachinery components, 2000.
  • 8Paul Giaconia. Trends in NC simulation. Tooling & Production,1996(6) :31 -42.
  • 9张磊,张振亚.UGNX4后处理培训教程[K].北京:清华大学出版社.2007.
  • 10高勇,苑桂萍.UGNX中文版数控加工基础教程[K].北京:人民邮电出版社.2006.

共引文献120

同被引文献30

引证文献6

二级引证文献18

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部