摘要
研究了以AlCl_3/含氧引发剂为催化体系的异丁烯阳离子聚合制备中、高相对分子质量聚异丁烯(PIB)的过程,探讨了引发剂种类、引发剂用量、聚合温度、单体用量、溶剂极性及聚合时间等对聚合的影响。结果表明:AlCl_3/苯乙醚作为引发剂,在聚合温度为-60℃的条件下,以二氯甲烷为溶剂,可制备相对分子质量为22.12×10~4的PIB,单体转化率达到99.00%以上;以正己烷与二氯甲烷为溶剂,且正己烷体积分数为50%时,可制备相对分子质量达48.56×10~4的高相对分子质量PIB。
This paper explores the synthesis of middle and high molecular weight polyisobutylene(PIB)via isobutylene cationic polymerization catalyzed by AlCl3/oxygen-containing initiator system. The factors that contribute to the polymerization were investigated which include initiators,catalyst concentration, monomer concentration,solvent polarity,polymerization temperature and time. The results show that medium molecular weight PIB(Mw=22.12×104)is obtained in dichloromethane with AlCl3/phenetole as the initiator system at -60 ℃,in which the conversion of monomers reaches 99.00%. High molecular weight PIB(Mw=48.56×104)is produced with hexane/dichloromethane as the solvent in which the volume fraction of hexane is 50%.
作者
陈亮
朱志华
刘振
刘柏平
Chen Liang;Zhu Zhihua;Liu Zhen;Liu Boping(State Key Laboratory of Chemical Engineering, East China University of Science and Technology, Shanghai 200237, Chin)
出处
《合成树脂及塑料》
CAS
北大核心
2017年第6期13-16,33,共5页
China Synthetic Resin and Plastics
关键词
聚异丁烯
三氯化铝
苯乙醚
阳离子聚合
polyisobutylene
aluminum chloride
phenetole
cationic polymerization