期刊文献+

塑件粘斜顶块问题分析及解决方案 被引量:3

Analysis and solution of angle ejector stick to plastics
下载PDF
导出
摘要 以某汽车前灯装饰框为例,分析了塑件粘斜顶块的原因,并制定解决方案,针对半封闭式塑件特征,在不影响塑件使用性能的前提下,增加通气孔,抵消压力差,同时在斜顶块内增加内置推出结构,辅助脱模。结果表明:改进方案后塑件脱模顺利,机械手顺利取件。 Taking an automobile headlight decorative frame as an example, the reasons of the angle ejector stick to the plastics were analyzed, and the solution was developed. According to the semi-enclosed characteristic of the plastics, the vent holes were set up to eliminate the pressure difference without affecting the performance of plastics, and the internal ejection mechanism was designed in the angle ejector, which could assist demoulding. The results showed that the plastics were demoulding and took out by the manipulator smoothly.
出处 《模具工业》 2017年第11期56-58,共3页 Die & Mould Industry
关键词 汽车前灯装饰框 斜顶块 真空压力 通气孔 内置推出机构 automobile headlight decorative frame angle ejector vacuum pressure vent holes, internal ejection mechanism
  • 相关文献

参考文献4

二级参考文献7

共引文献12

同被引文献20

引证文献3

二级引证文献14

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部