摘要
应用ABAQUS软件对激光冲击处理2024铝合金的残余应力场进行三维有限元数值模拟。详细讨论了激光功率密度、光斑尺寸、脉冲宽度(脉宽)以及冲击次数等参数对残余应力场的影响规律。计算结果表明,光斑中心位置的残余压应力值随着激光功率密度的增大出现先增大后减小的趋势,在激光功率密度6.19GW/cm^2时其值最大;光斑半径的增加主要对残余压应力层深度影响较大;表面残余压应力最大值随着脉宽的增加而增加;冲击次数在一定阈值范围内,光斑中心的残余压应力增幅明显,之后逐渐趋于饱和。在一定参数范围内,残余压应力层深度随脉宽和冲击次数的增加而增大。
The three-dimensional finite element simulation is applied to analyse the residual stress field of 2024 aluminum alloy induced by laser shock processing（LSP）by using the ABAQUS software.The influence law of laser parameters including laser power density,laser spot size,full width at half maximum（FWHM）and shock times on residual stress field are systematically analyzed.The calculation results show that with the increase of laser power density,the residual compressive stress at the center of the beam increases first and then decreases,and the maximum value at the laser power density is 6.19 GW/cm2.The increase of the spot radius has a great influence on the depth of the residual compressive stress layer.To some extent,the maximum value of residual compressive stress increases with the increase of FWHM.The residual compressive stress at the spot center increases significantly under certain impact times and gradually reaches saturation.Within some range of parameters,the depth of residual compressive layer increases with the increase of FWHM and impact times.
出处
《应用激光》
CSCD
北大核心
2017年第6期852-858,共7页
Applied Laser
基金
国家自然科学基金资助项目(项目编号:51175446)
关键词
激光
表面处理
有限元
残余应力
laser
surface treatment
finite element
residual stress
