期刊文献+

富含FeS_2结核松软突出煤层高效成孔技术与装备 被引量:3

Highly efficient drilling technique and matched equipment for soft and outburst-prone coal seam rich in FeS_2 nodules
下载PDF
导出
摘要 针对河南义煤集团义安矿二1煤11080工作面富含FeS_2结核的松软突出煤层中的瓦斯抽采孔施工时,采用常规风压钻进技术出现的成孔深度浅、排粉困难、煤层钻遇率低等难题,提出了以钻杆翼片排粉为主、风压排粉为辅的复合排粉方式,通过对钻机能力的优选,钻具级配的参数优化,研制了Ф95/60.3 mm插接密封式螺旋钻杆和Φ98 mm胎体弧角型钻头,制定了钻进工艺参数,形成了一套可解决富含FeS_2结核的松软突出煤层施工的技术与装备。通过现场工业性试验,累计施工8个钻孔,最大成孔深度103.5 m,平均成孔深度近97 m,平均钻进效率10.4 m/h,纯钻进效率约18.3 m/h,表明了该套技术与装备在同类煤层施工中具有很好的应用效果。 Aiming at the problems such as shallow completed hole depth, difficult cutting discharge, low drilled ration of coal seams when drilling gas extraction holes by conventional air pressure drilling technology in soft and outburst-prone seam rich in FeS_2 nodules in working face 11080 of Yi'an mine, Henan Yi Coal Group, the composite cutting discharge mode in which the cuttings are discharged mainly by drill rod wings and subsidiarily by air pressure was put forward, through optimization of drill rig capacity and parameters of drilling tools, Φ95/60.3 mm plugged-in and sealing spiral rod and Φ98 mm arc bit were developed, the drilling technological parameters were formulated, forming a set of technology and equipment for drilling soft and outburst-prone coal seams rich in FeS_2 nodules. Through in-site industrial test, totally 8 boreholes were drilled, the maximum borehole depth was 103.5 m, the average borehole depth was nearly 97 m, the average penetration rate was 10.4 m/h, the net drilling efficiency was about 18.3 m/h, indicating that the technology and the equipment have good application effect for drilling similar seams.
出处 《煤田地质与勘探》 CAS CSCD 北大核心 2018年第1期181-184,共4页 Coal Geology & Exploration
基金 中煤科工集团西安研究院有限公司科技创新基金项目(2015XAYMS07)~~
关键词 松软突出煤层 FeS2结核 高效成孔技术 装备 soft and outburst-prone coal seam FeS2 nodules highly efficient drilling technique equipment
  • 相关文献

参考文献9

二级参考文献37

共引文献235

同被引文献33

引证文献3

二级引证文献30

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部