期刊文献+

Delta并联机械手刚体动力学模型简化方法 被引量:7

Simplified Method for Rigid Body Dynamic Models of Delta Parallel Manipulator
下载PDF
导出
摘要 基于虚功原理建立了机械手的完备刚体动力学模型,并对机械手动力学模型的各组成部分(惯性力矩项、惯性力项和重力项)进行了分类;在分析从动臂的运动对机械手力矩各组成部分贡献的基础上,提出了一种基于组合分配系数的刚体动力学模型简化策略;以简化刚体动力学模型与完备刚体动力学模型逼近度为优化目标,提出一种基于运动过程力矩偏差最小的优化指标,从而确定组合分配系数;基于以上刚体动力学简化方法,从机械手尺度参数与运动轨迹参数两方面因素出发,结合机械手典型运动轨迹,采用多因素分析方法,通过仿真分析了各因素对简化刚体动力学模型准确性的影响,结果表明该刚体动力学模型简化方法针对不同机械手尺度参数与运动轨迹参数均具有较高的计算速度和精度。 A complete rigid body dynamic models is established based on the virtual work principle,and the components of the dynamic models,i. e. the inertia moment term,the inertial force term and gravity term,are classified. After analyzing the slave arm movements on the contribution of the components of the manipulator torques,a simplified strategy for the rigid body dynamic models based on combinatorial mass distribution coefficients is presented; The degree of approximation between the simplified and complete models is introduced as an optimization objective,and an optimization index for minimizing the torque deviations between the two models during the motion of the manipulator is formulated in order to determine the combinatorial mass distribution coefficients; Based on the simplified method and considering the length and movement trajectory parameters of the manipulator,simulation of the parameters influence on the accuracy of the simplified models is implemented with the multi-factor analysis method,and the results show that the simplified models has higher computation speed and accuracy for different the length and movement trajectory parameters.
出处 《机械科学与技术》 CSCD 北大核心 2018年第3期329-336,共8页 Mechanical Science and Technology for Aerospace Engineering
基金 国家自然科学基金项目(51475320)资助
关键词 并联机械手 简化刚体动力学模型 组合分配系数 delta parallel manipulator simplified rigid body dynamic models combinatorial mass distributioncoefficient
  • 相关文献

参考文献3

二级参考文献18

共引文献55

同被引文献57

引证文献7

二级引证文献17

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部