期刊文献+

竹浆纤维色织经起花织物的设计与生产 被引量:11

Design and production of bamboo pulp fiber yarn-dyed warp figured fabric
原文传递
导出
摘要 设计与生产了竹浆纤维色织经起花织物。络筒工序采用“中车速、降毛羽、小张力、匀卷绕、勤巡回”的工艺原则;整经工序采用“中车速、中张力、降毛羽、三均匀、勤清洁”的工艺原则;浆纱工序采用“低车速、贴伏毛羽、增强保伸”的工艺原则:织造工序采用“早开口、大张力、中车速、严控温湿度”的工艺原则。通过采取以上技术措施,生产的产品经向台时断头为0.52根/万米,纬向台时断头为1.21根/万米。生产效率达到97%以上,入库一等品率达到99%以上,达到了较好的效果。 The bamboo pulp fiber yarn-dyed warp figured fabric is designed and produced. The winding process adopts the principle of " medium speed, reducing hairiness, small tension, uniform winding and continual circuit". The warping process adopts the principle of " medium speed, medium tension, reducing hairiness, three even and continual cleaning". The sizing process adopts the principle of" low speed, coverage hairiness, increasing strength and keeping elongation". The weaving process adopts the principle of "earlier open, larger tension, medium speed, controlling temperature and humidity strictly". By taking the above technical measures, the number of broken warp is less than 0.52 root/myriameter per hour and the number of broken weft is less than 1.21 root/myriameter per hour, and loom efficiency could increase to 97%, rate of first grade percentage in storage could reach above 99%.
作者 马顺彬 MA Shunbin(Jiangsu College of Engineering and Technology, Nantong 226007, Chin)
出处 《上海纺织科技》 北大核心 2018年第3期33-34,40,共3页 Shanghai Textile Science & Technology
基金 2017年度江苏高校“青蓝工程”资助[苏教师(2017)15号] 江苏省先进纺织工程中心科技项目(XJFZ/2015/13)
关键词 竹浆纤维 色织 经起花织物 织物规格 组织结构 bamboo pulp fiber yarn-dyed weaving warp figured fabric fabric specification fabric texture
  • 相关文献

参考文献5

二级参考文献21

共引文献32

同被引文献35

引证文献11

二级引证文献13

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部