摘要
以废弃工业乙烯-乙酸乙烯酯(EVA)泡沫边角料、天然橡胶(NR)和废旧胶粉等为原料,通过共混模压制备EVA边角料/NR/胶粉复合发泡材料。研究了交联剂、发泡剂等助剂的种类与含量对EVA边角料/NR/胶粉复合发泡材料的发泡性能和力学性能的影响。结果表明,偶氮二甲酰胺、过氧化二异丙苯、N550炭黑、轻质碳酸钙含量分别为4 phr(每百克份数)、0.8 phr、5 phr、10 phr时,复合发泡材料的发泡质量及力学性能较好。差示扫描量热、X射线衍射测试数据表明,在复合发泡材料体系中,EVA和NR的相容性良好,且填充胶粉后,共混体系的结晶能力下降。
The composite foams of poly （ethylene vinyl acetate） （EVA）/natural rubber （NR）/rubber powders were prepared by blending and compression molding method using the scraps of industrial EVA foams, NR and waste rubber powders as raw materials. The effects of the content of rubber powders and the additives, such as the cross-linking agent, blowing agent and fillers, on the property of the composite foams were investigated. Experimental data indicated that the foaming quality and mechanical properties were good when the contents of azodicarbonamide, dieumyl peroxide, carbon black N550 and light calcium carbonate were 4 phr, 0.8 phr, 5 phr and 10 phr, respectively. The microstructure and thermal property of composite foams of EVA/NR/rubber powders were measured by the differential scanning calorimetry and X-ray diffraction, confirming that EVA had good compatibility with NR in the composite foams. Besides, the crystallization of composite foams decreased after addition of rubber powders.
作者
徐琼楠
杨郑
刘仿军
刘凡
吴助浩
张桥
张云飞
吴艳光
郭俊芳
鄢国平
XU Qiongnan;YANG Zheng;LIU Fangjun;LIU Fan;WU Zhuhao;ZHANG Qiao;ZHANG Yunfei;WU Yanguang;GUO Junfang;YAN Guoping(School of Materials Science and Engineering, Wuhan Institute of Technology, Wuhan 430205, Chin)
出处
《武汉工程大学学报》
CAS
2018年第2期169-175,共7页
Journal of Wuhan Institute of Technology
基金
国家自然科学基金(51373128
51173140)
国家重点研发计划重点专项(2016YFB1101302)
武汉市高新技术产业科技创新团队培养计划项目(2015070504020217)
湖北高校2016年省级大学生创新创业训练计划项目(201610490022)
武汉工程大学研究生教育创新基金(CX2016004
CX2016012)
武汉工程大学第十期大学生校长基金(2015004)
