摘要
在30万t/a高密度聚乙烯(HDPE)装置上,分别选用高活性催化剂(牌号为BCE-SCH 100)和专利商提供的催化剂(牌号为Z 501),采用Hostalen淤浆法乙烯聚合工艺开发出聚乙烯管材专用料(牌号为PE 100 N)。试生产结果表明:在装置低负荷(26 t/h)运行下,BCE-SCH 100催化剂的活性(14.1~15.8 kg/g)和氢调敏感性(氢气消耗量为0.61 kg/t)劣于Z 501催化剂,但共聚性能优于后者;由BCE-SCH 100催化剂合成的聚合物细粉(不大于63μm)质量分数为1.23%,比Z 501催化剂降低约1倍,满足装置长周期稳定运行的要求;由前者生产的PE 100 N物理机械性能优于后者。
The special material for PE tube （PE 100 N ）was developed by the Hostalen slurry poly- merization process, with high activity catalyst （BCE - SCH 100） and licensor catalyst （Z 501） re- spectively in a 300 kt/a high density polyethylene plant. The trial production results showed that when the unit operated at lower load （26 t/h）, the activity （ 14.1 - 15.8 kg/g） and hydrogen sensitivity （hydro- gen consumption 0. 61 kg/t）of BCE - SCH 100 cata- lyst both were inferior to those of Z 501 catalyst, ex-cept copolymerization performance; the mass fraction of polymer fines （≤63 μm ） was 1.23% polymerized by the BCE -SCH 100 catalyst, and it reduced by a half than that of Z 501 catalyst, meeting the long stable operational requirement of unit. The physical mechanical properties of PE 100 N produced by the former catalyst were better than those of the latter.
作者
鲁成祥
黄富
彭国峰
肖子文
LU Cheng - xiang;HUANG Fu;PENG Guo - feng;XIAO Zi - wen(Production Division No 1 of Sichuan Petrochemical Co Ltd, PetroChina, Chengdu 611930, China)
出处
《石化技术与应用》
CAS
2018年第3期187-190,共4页
Petrochemical Technology & Application
关键词
乙烯
1-丁烯
淤浆聚合
催化剂
高密度聚乙烯
颗粒形态
物理机械性能
ethylene
1 - butylene
slurry poly- merization
catalyst
high density polyethylene
mor-phology of particulate
physical mechanical property
