摘要
为考察预打孔卷烟接装纸施胶效果对通风率的影响,建立了一种接装纸施胶效果评价及无胶区偏移时的优化调整方法,在无胶区处于理想状态下利用正交试验研究了无胶区长度、宽度以及施胶厚度对通风率的影响。结果表明:(1)对预打孔卷烟通风率的影响依次为无胶区长度、宽度和施胶厚度,无胶区长度对通风率的影响达到显著水平。(2)随着无胶区长度的增加,预打孔卷烟通风率均值呈上升趋势,通风率变异系数呈下降趋势。(3)根据试验结果可确定"黄山(B)"牌号卷烟最佳胶辊参数组合为无胶区长度22mm,宽度8mm,施胶厚度0.03mm。该方法为提高预打孔卷烟通风率的稳定性提供了技术支持。
To investigate the influences of preperforated tipping paper gluing factors on the ventilation rate of cigarette, a tipping paper gluing effect evaluation and gluing position adjustment method was developed. With glue-free zone in its right position, the influences of the length and width of glue-free zone and gluing thickness on the ventilation rate were studied via an orthogonal experiment. The results showed that： 1） These factors in the order of influence on the ventilation rate were glue-free zone length glue-free zone width gluing thickness, wherein the influence of glue-free zone length reached a significance level. 2） With the extension of glue-free zone, the average ventilation rate increased, while the coefficient of variation of ventilation rate decreased. 3） The optimal parameters of glue roller for cigarette brand＂Huangshan（B）＂were glue-free zone length 22mm, width 8mm, and gluing thickness 0.03mm. The mentioned method provides a technical support for promoting the consistency of ventilation rate of cigarette with preperforated tipping paper.
作者
邵名伟
严志景
谢映松
张保永
何金华
张超
瞿先中
卢幼祥
SHAO Mingwei;YAN Zhijing;XIE Yingsong;ZHANG Baoyong;HE Jinhua;ZHANG Chao;QU Xianzhong;LU Youxiang(China Tobacco Anhui Industrial Co., Ltd., Hefei 230088, China;Bengbu Cigarette Factory, China Tobacco Anhui Industrial Co., Ltd., Bengbu 233010, Anhui, China)
出处
《烟草科技》
EI
CAS
CSCD
北大核心
2018年第5期81-86,共6页
Tobacco Science & Technology
基金
安徽中烟工业有限责任公司科技项目"预打孔卷烟通风率控制技术的研究"(2015107)
关键词
预打孔卷烟
通风率
接装纸
施胶效果
正交试验
胶辊
Preperforated cigarette
Ventilation rate
Tipping paper
Gluing effect
Orthogonal experiment
Glue roller
