摘要
某型飞机减速板作动筒经高温100℃浸液压油后再进行高低温试验,其漆层发生起泡故障。本文通过试验分析,找到了故障原因。
When the speed brake actuator of an aircraft was subjected to high-low temperature test after immersed into hydraulic oil at high temperature of 100℃, the paint blistered. In this paper, the cause of failure was found through test analysis.
作者
李旭勇
向业
李燕平
吴宁
Li Xuyong;Xiang Ye;Li Yanping;Wu Ning(AVIC-HONGDU, Nanchang, Jiangxi, 33002)
出处
《教练机》
2018年第1期35-37,共3页
Trainer
关键词
起泡故障
单组份漆
加速固化
Blister failure
Single component paint
Accelerated curing
