摘要
采用抽滤法在碳纳米管薄膜中引入聚乙烯醇构筑复合网络结构,并利用聚乙烯醇的官能团增强薄膜与基底间的范德华作用力,实现强粘附效果。通过选择聚合物的平均聚合度,可实现在玻璃基底上最高达到550kPa的粘附强度,是未经聚乙烯醇处理的6~10倍。这种复合结构也可以显著提高对铜片、硅片、镍箔的粘附效果,其平均粘附强度可分别达到172.6,305.7,335.5kPa。
By incorporating polyvinyl alcohol（PVA）into carbon nanotube（CNT）film to form an entangled network,the adhesion between CNT film onto supporting substrates was remarkably enhanced due to the abundant functional group of PVA.By adjusting the degree of polymerization,a maximum adhesion strength of 550 kPa was achieved on glass substrates,which was about 6 to 10 times that of film without being treated by PVA.CNT/PVA composite film also shown strong adhesion onto Cu,Si,and Ni films,where the averaged adhesive strength was 172.6 kPa,305.7 kPa,and 335.5 kPa,respectively.
作者
姜春阳
王光辉
张鑫
陈威艳
邹菁云
张骁骅
李清文
Jiang Chunyang;Wang Guanghui;Zhang Xin;Chen Weiyan;Zou Jingyun;Zhang Xiaohua;Li Qingwen(School of Materials Science and Engineering,Shanghai University, Shanghai 200444;Suzhou Institute of Nano-Tech and Nano-Bionics,Chinese Academy of Sciences,Suzhou 215123;College of Science, Shanghai University, Shanghai 200444)
出处
《化工新型材料》
CAS
CSCD
北大核心
2018年第6期91-94,99,共5页
New Chemical Materials
基金
国家自然科学基金(51561145008
11302241)
中国科学院青年创新促进会基金(2015256)
关键词
碳纳米管
聚乙烯醇
粘附强度
范德华作用力
抽滤
carbon nanotube
polyvinyl alcohol
adhesive strength
Van der Waals force
suction
