期刊文献+

CPR1000机组定期试验优化方法研究 被引量:4

Study on Optimization Method for Periodical Tests of CPR1000 Nuclear Power Unit
原文传递
导出
摘要 针对中国改进型三环路压水堆(CPR1000)机组安全系统定期试验存在的问题,结合机组安全分析、定期试验设计方法,提出CPR1000机组定期试验的优化方法。针对机组典型仪控报警[余热排出系统(RRA)未隔离且反应堆冷却剂系统高压(RRA 504KA)]定期试验,分析了该定期试验存在的问题;基于本文提出的优化方法,提出了优化方案,并对该优化方案进行了安全分析。安全分析结果表明:该优化方案是可行的。 Aiming at the problems of periodical tests for high safety significant systems in CPR1000 nuclear power unit, the optimization method for periodical tests for CPR1000 is proposed based on the methodology of periodical test design and safety analysis. For the periodical test of the classic instrument alarming, i.e., the residual heat removal system is not isolated and the reactor coolant system is with high pressure, the problems were analyzed and the optimization scheme is proposed. According to the optimization method for periodical tests presented, the safety of the optimization scheme is analyzed, which shows that the scheme is correct and valid. The optimization method for the periodical test of CPR1000 Nuclear Power Unit is beneficial to the nuclear safety.
作者 杨波 张钊 赵福宇 沈荣发 Yang Bo;Zhang Zhao;Zhao Fuyu;Shen Rongfa(Suzhou Nuclear Power Research Institute,Shen2hen,Guangdong,518000,China;Xi'an Jiaotong University,Xi'an,710049,China)
出处 《核动力工程》 EI CAS CSCD 北大核心 2018年第4期123-127,共5页 Nuclear Power Engineering
关键词 定期试验 余热排出系统 优化方法 安全分析 Periodic test Residual heat removal system Optimization method Safety analysis
  • 相关文献

参考文献4

二级参考文献14

  • 1Davies L M, Lyssakov V. Plant Life Management Programm es-Defining the Milestones of NPP Life[C]. Nuclear Engineering International Conference, London,November, 2001:28 - 30.
  • 2IAEA Technical Report Series. Co-Ordinated Research Program on Irradiation Embrittlement of Pressure Vessel Steels[ R ]. IAEA-176, Vienna, 1975.
  • 3RCCM.法国900MWt核电厂机械设备建造标准【S】.1993.
  • 4EJ/T322-94.压水堆核电厂反应堆压力容器设计准则【S】.1994.
  • 5Ritchie R O, Knott J F, Rice J R. On the Relationship between Critical Tensile Stress and Fracture Toughness in Mild Steel [J]. Jnl Meeh Phys Solids, 1973, 21:395 -410.
  • 6Wallin K, Saario T, Torronen K. Statistical Model for Carbide Induced Brittle Fracture in Steel [J]. Metal Science, 1984, 18(1): 13 - 16.
  • 7Zhang X Z, Knott J F. Cleavage Fracture in Bainitic and Martensitic Microstructures[J]. Acta Materialla, 1999,47(12): 3483 - 3495.
  • 8Zhang X Z, Knott J F. Statistical Modeling of Brittle Fracture in Homogeneous and Heterogeneous Steel Microstructures[J]. Acta Materialla, 2000, 48:2135- 2146.
  • 9解德,钱勤,李长安.断裂力学中的数值方法及工程应用[M].北京:科学出版社,2009:14-18.
  • 10PISTORA V. Finite element analysis of pressur- ized thermal shock scenarios for reactor pressure vessels[C]//TNPP-NESCR-NRI Workshop on Verliferez. [S. 1. ] [s. n. ], 2008.

共引文献13

同被引文献12

引证文献4

二级引证文献9

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部