摘要
以树苔浸膏为原料,构成其典型苔清香香气风格特征的有效组分相对含量为指标,在单因素试验的基础上,应用Box-Behnken中心组合设计试验,对分子蒸馏的系统压力、蒸馏温度和转子转速3个工艺参数进行了优化。结果表明,分子蒸馏分离树苔浸膏有效组分最佳的工艺条件为系统压力4.5 Pa、蒸馏温度73℃、转子转速210 r/min。在此条件下,有效组分含量(相对质量分数)为18.3752%,与预测值接近,说明模型拟合良好,该优化工艺合理可行。
Based on single-factor experiments, the effects of parameters of distillation pressure, distillation temperature and rotation speed on the contents of active components considered as the key typical moss aroma in the fraction of treemoss concrete were explored and optimized with the Box-Behnken central composite design method. The results showed that the optimal conditions were distillation pressure 4.5 Pa, distillation temperature 73 ℃ and rotation speed 210 r/min. Under these conditions, the experimental relative mass content of active components was 18.3752%,which was well matched with the value predicted by the developed model. This meant that the response surface methodology could be used for optimizing separation process of active components in treemoss concrete with good applicability and feasibility.
作者
朱怀远
张媛
庄亚东
何红梅
曹毅
尤晓娟
刘献军
熊晓敏
ZHU Huai-yuan;ZHANG Yuan;ZHUANG Ya-dong;HE Hong-mei;CAO Yi;YOU Xiao-juan;LIU Xian-jun;XIONG Xiao-min(Technology and Research Center of China Tobacco Jiangsu Industrial Co.,Ltd.,Nanjing 210019,Jiangsu,China)
出处
《香料香精化妆品》
CAS
2018年第4期17-22,共6页
Flavour Fragrance Cosmetics
基金
中国烟草总公司重大专项科技项目[110201201011(BR-05)]
关键词
分子蒸馏
响应面法
树苔浸膏
有效组分
molecular distillation
response surface methodology
treemoss concrete active components
