摘要
采用不同的脉冲频率对YG8硬质合金刀具进行激光热处理,并进行了不同温度下的耐磨损性能测试分析。结果表明：随激光热处理脉冲频率从40 k Hz增加至90 k Hz时,YG8硬质合金刀具的磨损性能先提高后下降。与40k Hz激光热处理脉冲频率相比,采用70 k Hz激光热处理脉冲频率时,刀具在室温和300℃高温下磨损体积分别减小57%、74%。YG8硬质合金刀具的激光热处理脉冲频率优选为70 k Hz。
The laser heat treatment of YG8 cemented carbide cutting tools was carried out with different pulse frequencies,and the wear resistance of YG8 cemented carbide cutters at different temperatures was tested and analyzed. The results show that, with the increase of pulse frequency from 40 to 90 k Hz, the wear properties of YG8 carbide tools first increase and then decrease. Compared with that of the laser heat treatment with pulse frequency of 40 k Hz, when the pulse frequency of laser heat treatment is 70 k Hz, the wear volume of the tool decreases by 57% at room temperature and by 74% at 300 ℃ high temperature,respectively. The optimized pulse frequency of laser heat treatment for YG8 cemented carbide cutting tools is 70 k Hz.
作者
易军
陈善雄
YI Jun;CHEN Shanxiong(School of Mechanical Engineering,Chongqing Industry Polytechnic College,Chongqing 401120,China;College of Computer and Information Science,Southwest University,Chongqing 400715,China)
出处
《热加工工艺》
CSCD
北大核心
2018年第16期242-244,共3页
Hot Working Technology
基金
重庆市教委科技项目(KJ1730417)
关键词
脉冲频率
硬质合金刀具
激光热处理
耐磨损性能
pulse frequency
cemented carbide cutting tool
laser heat treatment
wear resistance
