期刊文献+

不同粘结体系对PBX炸药能量输出特性的影响 被引量:3

Different Binder System Influence on Energy Output Characteristics of PBX
下载PDF
导出
摘要 粘结剂作为PBX炸药中重要的添加剂,对炸药的力学性能、能量特性等都有很大的影响。为研究不同粘结体系对PBX炸药水下爆炸能量特性的影响,首先对不同粘结体系炸药配方进行优化设计,然后进行不同粘结体系PBX炸药的水下爆炸试验。试验结果表明:与HTPB惰性粘结体系炸药相比,含能粘结体系应用于PBX炸药后,比冲击波能提高了12%~23%;但是由于含能粘结体系力学和工艺性能的限制,使得炸药固含量降低,降低了炸药的气泡能。总的来看,TEGDN、GAP、HTPB粘结体系的PBX炸药总能量分别达到了2.01、1.99、2.15倍TNT当量。 As the important part of polymer bonded explosive,blinders has great effect on the mechanical property andenergy characteristics.In order to research the influence of different binders on energy characteristics of PBX underwaterexplosion,the formula of each binders was carried out optimal design,then the underwater explosion experiment ofdifferent blinders PBX were conducted.The test result showed that,compared with HTPB inactive binder system explosive,the shockwave of PBX with energetic binder system increases by12%~23%.Meanwhile the bubble performance ofexplosive with energetic binders is decreased because the mechanical property and processing performance of energeticbinders were poor which lead the decrease of solid-content.In summary,the TNT equivalent of explosive with TEGDNbinder,GAP binder and HTPB binder arrived2.01,1.99and2.15respectively.
作者 李瑶瑶 崔庆忠 Li Yaoyao;Cui Qingzhong(State Key Laboratory of Explosion Science & Technology, Beijing Institute of Technology, Beijing 100081, China)
出处 《兵工自动化》 2017年第7期1-4,19,共5页 Ordnance Industry Automation
基金 国防重点预研基金项目(4010303)
关键词 配方设计 含能粘结体系 水下爆炸 能量输出结构 formulation design energetic binders system underwater explosion energy output structure
  • 相关文献

参考文献4

二级参考文献56

  • 1李平,陈强,李旭利,甘孝贤,蔚红建.GAP共聚体系静态力学性能研究[J].火炸药学报,2000,23(2):23-25. 被引量:16
  • 2姬月萍,李普瑞,汪伟,兰英,丁峰.含能增塑剂的研究现状及发展[J].火炸药学报,2005,28(4):47-51. 被引量:87
  • 3张海燕,陈红.降低推进剂特征信号的新材料———支化GAP[J].火炸药,1996,19(3):46-48. 被引量:4
  • 4吕勇,罗运军,张继光,等.GAP-HTPB-GAP嵌段共聚物的合成与表征[C] //火炸药学术研讨会论文集.北京:北京理工大学,2008.
  • 5Kawamoto A M,Oliveira J I,Dutra R S,et al.Synthesis and characterization of energetic thermoplastic elastomers for propellant formulations[J].Journal of Aerospace Technology and Management,2009,1 (1):35-42.
  • 6Byoung S M.Characterization of the plasticized GAP/PEG and GAP/PCL block copolyurethane binder matrices and its propellants[J].Propellants,Explosives,Pyrotechnics,2008,33(2):131-138.
  • 7Mathew S,Manu S K,Varghese T L.Thermomechanical and morphological characteristics of crosslinked GAP and GAP-HTPB networks with different diisocyanates[J].Propellants,Explosives,Pyrotechnics,2008,33(2):146-152.
  • 8Cossu C,Heuzey M C,Lussier L S,Dubois C.Early development of a biodegradable energetic elastomer[J].Journal of Applied Polymer Science,2011,119:3645-3657.
  • 9Talawar M B,Sivabalan R,Mukundan T,et al.Environmentally compatible next generation green energetic materials (GEMs)[J].Journal of Hazardous Materials,2009,161(2-3):589-607.
  • 10Paraskos,Dewey A,Edwards M A,One pot procedure for poly (glycidyl nitrate) end modification:US,7714078[P].2010.

共引文献48

同被引文献40

引证文献3

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部