期刊文献+

采用非对称轮换式保护反应器的固定床渣油加氢技术开发 被引量:8

DEVELOPMENT OF FIXED-BED RESIDUE HYDROTREATING TECHNOLOGY WITH ASYMMETRIC SWTCHING GUARD REACTORS
下载PDF
导出
摘要 开发了采用非对称轮换式保护反应器的固定床渣油加氢技术以及轮换保护反应区专用脱金属催化剂和催化剂器外硫化技术,并以不同金属含量的渣油为原料,在固定床中型装置上进行了轮换保护反应区和主反应区的催化剂活性稳定性以及工艺原料适应性等试验。结果表明:主反应区的催化剂级配具有良好的活性稳定性,主反应区的运转周期可达到3年;非对称轮换式保护反应器的固定床渣油加氢技术原料适应性好、杂质脱除率高、产品分布好,是延长固定床渣油加氢运转周期优选的技术。 The HDM activity stability and suitability of guard catalysts and main reaction catalysts for residues were tested in a pilot plant.The test device consists of fixed-beds with asymmetric switching guard reactors specially developed for residue hydrotreating process.The results showed that the layered main catalyst bed exhibits good activity stability and can run smoothly for 3 years in the case of feed in test.The developed residue hydrotreating system with asymmetric guard reactor shows a satisfied suitability for residue with different metal content,high impurities removal rate and good product distribution.
作者 邓中活 邵志才 牛传峰 戴立顺 刘涛 孙淑玲 胡大为 杨清河 Deng Zhonghuo;Shao Zhichai;Niu Chuanfeng;Dai Lishun;Liu Tao;Sun Shuling;Hu Dawei;Yang Qinghe(SINOPEC Research Institute of Petroleum Processing,Beijing 100083)
出处 《石油炼制与化工》 CAS CSCD 北大核心 2018年第10期9-14,共6页 Petroleum Processing and Petrochemicals
关键词 渣油加氢 保护反应器 运转周期 固定床 residue hydrotreating guard reactor operation cycle fixed bed
  • 相关文献

参考文献6

二级参考文献66

  • 1刘慧娟,周华群,郭绪强,李文乐.劣质残渣油的加工和应用技术进展[J].中外能源,2012,17(2):74-79. 被引量:6
  • 2石亚华,牛传峰,高永灿,戴立顺.渣油加氢技术的研究 Ⅱ.渣油加氢与催化裂化双向组合技术(RICP)的开发[J].石油炼制与化工,2005,36(11):21-24. 被引量:29
  • 3石亚华.石油加工过程中的脱硫[M].北京:中国石化出版社,2009:1-20.
  • 4Petkov K, Stratiev D. Residue upgrading: Challenges and perspectives[J]. Hydrocarbon Processing, 2009, 88 (9): 93-96.
  • 5Castafieda L C, Mufioz J A D, Ancheyta J. Combined process schemes for upgrading of heavy petroleum[J]. Fuel, 2012, 100: 110-127.
  • 6Meena Marafi , Anthony Stanislaus. Handbook of Spent Hydroprocessing Catalysts : Regeneration , Rejuvenation , Reclamation, Environment and Safety[M]. New York: Elsevier, 2010: 35-48.
  • 7Ancheyta, Jorge. Modeling of Processes and Reactors for Upgrading of Heavy Petroleum[M]. CRC Press, Taylor & Francis Group, 2013: 45-64.
  • 8Ronald Birkhoff, Matti Nurminen. Refining Processes Handbook. Hydrocarbon processing[M]. Gulf Publishing Company, 2006: 195-201.
  • 9Threlkel Rich, Dillon Chris, Singh Udayshankar G. Increase flexibility to upgrade residuum using recent advances in RDS/VRDS-RFCC process and catalyst technology[J]. Journal of the Japan Petroleum lnstitute, 2010, 53 (2): 65-74.
  • 10Jean Pan, Margotin. Conversion options for clean fuel production[C]// Refining Challenges & Way Forward, New Delhi, April 16-17, 2012.

共引文献93

同被引文献96

引证文献8

二级引证文献30

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部