摘要
目的设计研制舱室湿度调节系统,用于开展装甲车辆舱室热舒适性测试与评价技术研究。方法通过任务计算机设定实验任务,并将湿度目标值通过RS485总线传输给PLC控制器,由PLC控制器控制加湿机和除湿机工作,同时由湿度传感器对舱室内的湿度进行实施监控,达到目标值后,进行加湿和除湿的动态控制。结果该系统可实现20%～95%舱内湿度调节。结论为开展装甲车辆舱室湿热环境研究奠定实验基础。
Objective To design a set of cabin humidity control system to carry out thermal comfort test and evaluation technique research on armored vehicle cabin.Methods The test tasks were set by the task computer.The target values were transferred through RS485 trunk to the PLC controller.The humidifier and dehumidifier were controlled by the PLC controller.The humidity sensor was used to monitor the humidity in the cabin at the same time.After reaching the target value,the dynamic control of humidification and dehumidification was carried out.Results The system can actualize cabin humidity from 20%RH to 95%RH.Conclusion It establishes the experimental foundation for studying the heat and humidity environment of the armored vehicle cabin.
作者
张伟
王学友
武海明
刘晓峰
吴亚楠
李毅
柴渭莉
ZHANG Wei;WANG Xue-you;WU Hai-ming;LIU Xiao-feng;WU Ya-nan;LI Yi;CHAI Wei-li(Hygiene Research Institute of Ordnance Industry,Xi'an 710065,China)
出处
《装备环境工程》
CAS
2019年第1期89-91,共3页
Equipment Environmental Engineering
关键词
舒适性
装甲车辆
湿度
舱内
实验
设计
研制
评价
comfort
armored vehicle
humidity
cabin
experiment
design
development
evaluation
