期刊文献+

带舭龙骨船体的横摇自由衰减的数值研究 被引量:2

Numerical study for free-roll damping of a ship with bilge
下载PDF
导出
摘要 为了研究带舭龙骨的船体横摇自由衰减运动,本文建立了基于Open FOAM的粘性流场数学模型。模型采用六自由度运动方程与动网格技术计算船舶运动,应用阻尼消波技术消除远处的数值水池壁面产生的反射波,有效提高了数值预报的精度;通过对比模拟得到的衰减曲线和阻尼系数与试验所得的结果,分析了舭龙骨附近的涡量场,并探讨了舭龙骨减摇的机理。结果表明本文建立的数值模型可以准确地模拟船体横摇运动,成功预报了不同高度舭龙骨的减摇效果。 To investigate the free-roll damping of a hull with bilge keel,a viscous flow field model was established based on the open source software open field operation and manipulation(OpenFOAM),using a six degree of freedom(6 DOF)model and dynamic grid technology to solve the ship motion.The radiation wave in the position far from the ship was eliminated by a wave damping absorber method,which can improve accuracy in the numerical prediction.The simulated free-roll damping curves and damping coefficients were compared with experimental data,and the vorticity field near the bilge keel was analyzed.The mechanism of roll decaying by the bilge keel was also discussed.The results showed that the model can accurately simulate the free-roll of the ship and successfully predict the roll damping effects of bilge keels of different heights.
作者 姜宜辰 赵晓杰 宗智 JIANG Yichen;ZHAO Xiaojie;ZONG Zhi(School of Naval Architecture,Dalian University of Technology,Dalian 116024,China;Collaborative Innovation Center for Advanced Ship and Deep-Sea Exploration,Shanghai 200240,China;State Key Laboratory of Structural Analysis for Industrial Equipment,Dalian 116024,China)
出处 《哈尔滨工程大学学报》 EI CAS CSCD 北大核心 2019年第1期81-87,共7页 Journal of Harbin Engineering University
基金 国家自然科学基金项目(51679037 51279030)
关键词 横摇衰减 舭龙骨 OPENFOAM 阻尼消波 动网格 六自由度 粘性流场 数值模拟 roll damping bilge keel OpenFOAM wave damping absorber dynamic grid six degree of freedom viscous flow field numerical simulation
  • 相关文献

参考文献4

二级参考文献32

  • 1PU Jin-yun ZHANG Wei-kang JIN Tao JI Gang.MELINIKOV’S METHOD FOR NON-LINER ROLLING MOTIONS OF A FLOODED SHIP[J].Journal of Hydrodynamics,2005,17(5):580-584. 被引量:3
  • 2Fluent. Inc: FLUENT User's Guide[K]. 2005.
  • 3Himeno Y. Prediction of ship roll damping-state of the art[R]. Department of Naval Architecture and Marine Engineering, University of Michigan, Report No. 239, 1981.
  • 4Kluwe F, Schmode D, Jensen G. RANS based analysis of roll damping moments at bilge keels[C]//8th NuT/S, Varna, Bulgaria, 2005.
  • 5Liut D, Mook D, Weems K, Nayfeh A. A numerical model of the flow around ship-mounted fin stabilizers[J]. International Shipbuilding Progress, 2001, 48(1).
  • 6Salui K B, Shigunov V, Vassalos D. A RANSE based prediction method of the ship roll damping with forward speed[C]// 6th NuTTS, Rome, 2003.
  • 7Vugts J H. The hydrodynamic coefficients for swaying, heaving and rolling cylinders in a free surface[R]. Report No. 194, Laboratorium voor Scheepsboukunde, Technische Hogeschool Delft, The Netherlands, 1968.
  • 8Yeung R W, Laio S W, Roddier D. Hydrodynamic coefficients of roll rectangular cylinders[J]. International Journal of Off- shore and Polar Engineering, 1998, 8(4).
  • 9Yeung R W, Roddier D, Alessandrini B, Gentaz L, Laio S W. On roll hydrodynamics of cylinders fitted with bilge keels [C]// Proceedings of 23rd symposium on Naval Hydrodynamics, 2000.
  • 10IKEDA Y. A prediction method for ship roll damping[R]. University of Osaka, 1978.

共引文献32

同被引文献9

引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部