期刊文献+

锂硫电池复合正极材料的制备及性能研究 被引量:3

Preparation and performance of composite cathode material for lithium-sulfur batteries
下载PDF
导出
摘要 以3-丁基噻吩作为导电聚合物,三聚硫氢酸作为交联剂,采用自由基法制备环状结构锂硫复合正极材料。用X射线衍射仪(XRD)、热重分析仪和扫描电镜来表征材料的结构和形貌,结果表明,复合材料形成了明显的环状结构,相互间结合紧密,硫含量大约为质量分数60%。电化学性能测试表明,当电流密度为167.5 mA/g时,电池的首次和第100次放电比容量分别为1 356和910 mAh/g;当电流密度增加到3 350 mA/g时,放电比容量仍然有498 mAh/g,说明制备的复合正极材料大倍率电化学性能好,具有强的结构稳定性。 With 3-butyl thiophene as conductive polymer, and trimeric thiocyanate as crosslinking agent, lithium sulfur composite cathode material with ring structure was prepared by free radical system. The structure and morphology were characterized by X ray diffraction, thermogravimetric analyzer and scanning electron microscopy. The results show that the composite has an obvious ring structure, and the material particles bind tightly, and the sulfur content is about 60%. The electrochemical performance tests show that when the current density is 167.5 mA/g, the initial specific capacity and the 100th discharge specific capacity is 1 356 and 910 mAh/g respectively;when the current density increases to 3 350 mA/g, the discharge specific capacity is 498 mAh/g, meaning that the composite cathode material has good high rate discharge performance and strong structure.
作者 谢曲 黄美红 XIE Qu;HUANG Mei-hong(Liuzhou Product Quality Testing Institute, Liuzhou Guangxi 545001, China;Guangxi Eco-Engineering Vocational and Technical College, Liuzhou Guangxi 545004, China)
出处 《电源技术》 CAS 北大核心 2019年第2期204-206,共3页 Chinese Journal of Power Sources
基金 广西科技大学研究生教育创新计划项目(YCSW2017-200)
关键词 锂硫电池 聚合物 交联剂 环状结构 电化学性能 lithium sulfur batteries polymer crosslinker ring structure electrochemical performance
  • 相关文献

参考文献5

二级参考文献157

  • 1苑克国,王安邦,余仲宝,王维坤,杨裕生.1,3-二氧戊环基LiCF_3SO_3电解液对锂硫电池正极材料单质硫的电化学性能影响[J].高等学校化学学报,2006,27(9):1738-1741. 被引量:10
  • 2Jl X, LEE K T, NAZAR L F. A highly ordered nanostmctured car- bon-sulphur cathode for lithium-sulphur batteries[J]. Nature Materi-als, 2009, 8:500-506.
  • 3MANTH1RAM A,FU Y, SU Y. Challenges and prospects of lithium- sulfur batteries [J]. Accounts of Chemical Research, 2013,46 (5): 1125-1134.
  • 4JAYAPRAKASH N, SHEN J, MOGANTY S S. et al. Porous hollow carbon@sulfur composites for high-power lithium-sulfur batteries [J]. Angew Chem Int Ed,2011,50:5904-5908.
  • 5QIN Z, ZHOU X, XIA Y. et al. Morphology controlled synthesis and modification of high-performance LiMnPO4 cathode materials for Li-ion batteries[J]. Journal of Materials Chemistry,2012,22:21144- 21153.
  • 6SHAO Y, ZHANG S, WANG C, et al. Highly durable graphene nanoplatelets supported Pt nanocatalysts for oxygen reduction [J]. Journal of Power Sources,2010,195:4600-4605.
  • 7PERAMUNAGE D, L1CHT S.A solid sulfur cathode for aqueous ba- tteries[J]. Science, 1993, 261: 1029-1032.
  • 8JI X,NAZAR L F.Advances in Li-S batteries[J].Joumal of Materials Chemistry, 2010, 20: 9821.
  • 9DEAN J A. Lange's Handbook of Chemistry[M].3rd ed.NY: Mc- Graw-Hill, 1985: 3-5.
  • 10LEV1LLAIN E, GAILLARD F, LEIIEUR J P. Polysulfides in dime- thylformamide only the redox couples S, S,., are involved[J]. Jounal of the electrochemical chemistry, 1997,440: 243-250.

共引文献16

同被引文献19

引证文献3

二级引证文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部