摘要
无源软开关技术因其控制简单且易于实现,得到了广泛工程应用。但无源无损缓冲电路应用于大功率场合时,流过缓冲电路二极管和电感的电流较大,造成器件体积大和散热困难等问题。为了解决上述难题,提出一种适用于大功率场合的新型无源无损缓冲电路的拓扑结构以及该缓冲电路谐振元件参数的设计方法。通过使谐振回路尽量避免参与主电路续流过程,降低流过二极管与缓冲电感的电流。采用该拓扑设计的缓冲电路,在能够实现开关管零电流开通、零电压关断的前提下,具有更小的体积和发热量,提升了效率。通过设计一台15 kW的Buck变换器样机,验证了这种缓冲电路理论分析和设计的正确性。
Passive soft switching has been widely used in engineering because of its simple control and easy implementation. However, in high-power situations, the large current flowing through the diode and inductor result in a series problems such as device size and heat dissipation.In order to solve the above problems,a new passive lossless snubber which is suitable for high power situations and the design method of resonant elements is proposed.By making the resonant circuit avoid to participating in the main circuit’s freewheeling process,the current flowing through the inductor and diode can be reduced.The snubber designed by this topology achieves zero current turn-on and zero voltage turn-off with smaller size,better heat dissipation performance and a higher efficiency.A 15 kW Buck converter prototype based on the passive lossless snubber has been designed to verify the correctness of the analysis and design methodology.
作者
张弘雨
全书海
李占鹏
钱亮
ZHANG Hong-yu;QUAN Shu-hai;LI Zhan-peng;QIAN Liang(Wuhan University of Technology,Wuhan 430070,China)
出处
《电力电子技术》
CSCD
北大核心
2019年第5期104-106,共3页
Power Electronics
基金
湖北省技术创新专项(2016AAA046)~~
关键词
变换器
无源无损
零电流开通
零电压关断
converter
passive lossless
zero current turn-on
zero voltage turn-off
