期刊文献+

基于交指滤波器的高隔离度宽带双工器设计 被引量:2

Design of interdigital-filter based diplexer with high isolation and wideband
下载PDF
导出
摘要 针对用于无线通信系统中的高隔离度宽带双工器,首先将双工器指标拆分为留有一定余量的Tx,Rx滤波器指标,然后使用微带交指结构和基于耦合系数与外部品质因数的改进方法,设计出满足指标的宽带Tx,Rx滤波器,最后使用两种T型结和滤波器组合的结构对双工器进一步设计,并对这两种结构的微带双工器进行了仿真分析。仿真结果显示,并行连接的双工器结构紧凑,但隔离度较差;串行连接的双工器通带内最小回波损耗为14.16dB,最大插入损耗为1.01dB,通带间最小隔离度为53.46dB,双工器尺寸为8.0899mm×2.0591mm×0.302mm,完全满足指标要求,并且具有相对带宽大、隔离度高、插入损耗低的优点,为设计高性能双工器提供了可行性。 For diplexer with high isolation and wideband in wireless communication system, in this paper, the diplexer specification is divided into Tx and Rx filter specifications with a certain margin. Then the wideband Tx and Rx filter is designed by using the microstrip interdigital structure and the improved method based on coupling coefficient K and external quality factor Q e. Finally, two kinds of T-junction and filter combination structures are used to further design the diplexer, and the microstrip diplexer with these two structures are simulated and analyzed respectively. The simulation results show that the structure of parallel connection diplexer is compact, but the passband isolation is not satisfactory. The minimum return loss in the passband of the series connection diplexer is 14.16 dB, the maximum insertion loss is 1.01 dB, the minimum passband isolation is 53.46 dB, and the size of the diplexer is 8.089 9 mm×2.059 1 mm×0.302 mm. It has the advantages of large relative bandwidth, high isolation and low insertion loss, which provides the feasibility for the design of high-performance diplexer.
作者 高杨 文数文 袁靖 许夏茜 Gao Yang;Wen Shuwen;Yuan Jing;Xu Xiaxi(Institute of Electronic Engineering, China Academy of Engineering Physics, Mianyang 621999, China;School of Information Engineering, Southwest University of Science and Technology, Mianyang 621010, China)
出处 《强激光与粒子束》 EI CAS CSCD 北大核心 2019年第8期56-60,共5页 High Power Laser and Particle Beams
基金 国家自然科学基金项目(61574131)
关键词 微电子机械系统 双工器 交指滤波器 设计 micro-electro-mechanical systems (MEMS) diplexer interdigital filter design
  • 相关文献

参考文献6

二级参考文献32

  • 1王正伟,补世荣,罗正祥.一种识别雷达用半集总参数LTCC双工器[J].微波学报,2011,27(6):81-83. 被引量:2
  • 2聂广琳,王鲁豫.微带发夹式带通滤波器的计算机辅助设计[J].压电与声光,2005,27(2):206-208. 被引量:3
  • 3陈世勇,雷剑梅,胡旭,杨士中.一种具有传输零点的Hairpin带通滤波器设计[J].电路与系统学报,2005,10(4):145-147. 被引量:4
  • 4曹海林,陈世勇,杨士中.一种微带开路环双工器的设计[J].重庆邮电学院学报(自然科学版),2006,18(1):26-29. 被引量:5
  • 5HONG Jia-sheng.Design of highly selective microstrip bandpass filters with a single pair of attenuation poles at finite frequencies[J].IEEE Transactions on Microwave Theory and Techniques,2000,48(7):1098-1108.
  • 6HONG Jia-sheng.Coupling of microstrip suqare open-coupled plannar microwave filters [J].IEEE Transactions on Microwave Theory and Techniques,1996,44(12):2099-2109.
  • 7LEVV R.Synthesis of general asymmetric singly and doubly termined Crosscoupled filters[ J].IEEE Transactions on Microwave Theory and Techniques,1994,42(12):2468-2471.
  • 8甘本祓,吴万春.现代微波滤波器的结构与设计[M].北京:科学出版社,1972.
  • 9王子字,张肇仪.射频电路设计:理论与应用[M].北京:电子工业出版社,2002.
  • 10YOUI.A D C, WINTER F. New theorem in the synthesis of passive multiplexers [J]. International J. of Circuit Theory Application, 1991, 19(4) : 341-364.

共引文献14

同被引文献19

引证文献2

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部