摘要
针对夹苗式水稻钵苗移栽机构取苗易失败,以及推秧爪推秧不充分影响钵苗直立度等问题,根据水稻钵苗移栽机构的工作要求,提出了一种夹钵式水稻钵苗移栽机构。基于Visual Basic 6.0开发了移栽机构辅助分析优化软件,分析了主要参数对移栽轨迹的影响,通过人机交互方式得到了一组满足移栽工作要求的机构参数。根据得到的机构参数,完成移栽机构的结构设计,进行了移栽机构的虚拟仿真分析,验证了移栽机构理论设计的正确性。设计了水稻钵苗移栽试验台并进行了移栽机构取苗试验,移栽机构回转速度设定为50 r/min时,平均取苗成功率为93.06%,当转速为80 r/min时,平均取苗成功率为88.89%,取苗成功率随着转速的提高而降低。研究表明,该机构具有较高的取苗效率和取苗成功率,可应用于水稻钵苗移栽机。
In order to solve the problem of failure on clipping-seedling type transplanting mechanism of rice plug-seedling during seedling pick-up and not fully push-pull pushing that affect the upright degree of seedling,according to the design requirement of rice plug-seedling transplanting mechanism,a kind of clipping-plug type transplanting mechanism of rice plug-seedling was proposed.Firstly,according to the kinematic model of transplanting mechanism,an auxiliary analysis and optimization software of this kind of rice potted-seedling transplanting mechanism was independently developed with Visual Basic 6.0,and the influence of main parameters on the transplanting trajectory was also analyzed by the software.With the method of human-computer interaction based on visualization,a set of structural parameters satisfying the transplanting requirements was carried out.Then,according to the optimized parameters of mechanism,the overall structural design of the transplanting mechanism was completed.The correctness of the theoretical model and design of the transplanting mechanism was verified by the virtual simulation analysis of the transplanting mechanism.Finally,the test-bed for rice plug-seedling transplanting was designed,on which the seedling experiment of the transplanting mechanism was carried out.When the rotational speed of the transplanting mechanism was 50 r/min,the average success rate of seedling pick-up was 93.06%,which was decreased with the increase of rotational speed.When the rotational speed was 80 r/min,the average success rate of seedling pick-up dropped to 88.89%.It was showed that the mechanism had high seedling transplanting efficiency and high seedling success rate,so it can be applied to rice plug-seedling transplanting machine.
作者
俞高红
金也
常数数
叶秉良
顾锦波
赵雄
YU Gaohong;JIN Ye;CHANG Shushu;YE Bingliang;GU Jinbo;ZHAO Xiong(College of Mechanical Engineering and Automation,Zhejiang Sci-Tech University,Hangzhou 310018,China;Zhejiang Province Key Laboratory of Transplanting Equipment and Technology,Hangzhou 310018,China;Zhejiang Xiaojing Machinery Manufacturing Co.,Ltd.,Shaoxing 312000,China)
出处
《农业机械学报》
EI
CAS
CSCD
北大核心
2019年第7期100-108,共9页
Transactions of the Chinese Society for Agricultural Machinery
基金
国家重点研发计划项目(2017YFD0700800)
国家自然科学基金项目(51575495、51575496)
关键词
水稻钵苗
夹钵式
移栽机构
试验
rice plug-seedling
clipping-plug
transplanting mechanism
test
