期刊文献+

Grain Refining Performance of SHS Al-50TiC Master Alloys for Commercially Pure Aluminum 被引量:4

Grain Refining Performance of SHS Al-50TiC Master Alloys for Commercially Pure Aluminum
下载PDF
导出
摘要 An Al 50wt%TiC composite was directly synthesized by self propagating high temperature synthesis (SHS) technology,and then was used as a grain refining master alloy for commercially pure aluminum.The microstructure and grain refining performance of the synthesized master alloy were emphatically investigated.The SHS master alloy only contained submicron TiC particles except for Al matrix.Moreover,TiC particles were relatively free of agglomeration. Grain refining tests show that adding only 0.1 wt% of the master alloys to the aluminum melt could transform the structure of the solidified samples from coarse columnar grains to fine equiaxed grains (average grain size 120μm),and that this grain refining effectiveness could be maintained for almost 1.5h at 1003K. Therefore,it is concluded that the SHS master alloy is an effective grain refiner for aluminum and its alloys, and that it is highly resistant to the grain refining fading encountered with most grain refiners. An Al 50wt%TiC composite was directly synthesized by self propagating high temperature synthesis (SHS) technology,and then was used as a grain refining master alloy for commercially pure aluminum.The microstructure and grain refining performance of the synthesized master alloy were emphatically investigated.The SHS master alloy only contained submicron TiC particles except for Al matrix.Moreover,TiC particles were relatively free of agglomeration. Grain refining tests show that adding only 0.1 wt% of the master alloys to the aluminum melt could transform the structure of the solidified samples from coarse columnar grains to fine equiaxed grains (average grain size 120μm),and that this grain refining effectiveness could be maintained for almost 1.5h at 1003K. Therefore,it is concluded that the SHS master alloy is an effective grain refiner for aluminum and its alloys, and that it is highly resistant to the grain refining fading encountered with most grain refiners.
作者 严有为
出处 《Journal of Wuhan University of Technology(Materials Science)》 SCIE EI CAS 2002年第3期13-16,共4页 武汉理工大学学报(材料科学英文版)
基金 FinanciallysupportedbytheFoundationforExcellentYouthsofWuhanCity (No .2 0 0 15 0 0 5 0 2 8)
关键词 SHS Al TiC composite grain refiner microstructure grain refinement SHS Al TiC composite grain refiner microstructure grain refinement
  • 相关文献

参考文献8

  • 1A. Banerji,W. Reif.Metallographic investigation of TiC nucleants in the newly developed Al-Ti-C grain refiner[J].Journal of Materials Science.1994(7)
  • 2A. Banerji,Q. L. Feng Ph.D.,W. Reif.On identification of the nucleant in commercially pure aluminum castings inoculated with <0.15 pct titanium[J].Metallurgical Transactions A.1989(3)
  • 3Abinash Banerji,Winfried Reif.Development of Al-Ti-C grain refiners containing TiC[J].Metallurgical Transactions A.1986(12)
  • 4G. P. Jones,J. Pearson.Factors affecting the grain-refinement of aluminum using titanium and boron additives[J].Metallurgical Transactions B.1976(2)
  • 5L Arnberg,L Backerud and H Klang.Production and Properties of Master Alloy of Al-Ti-B Type and Their Ability to Grain Refine Aluminum[].Metals Technology.1982
  • 6D G McCartney.Grain Refining of Aluminum and Its Alloys Using Inoculants[].International Materials Reviews.1989
  • 7C D Mayes,D G McCartney and G J.Tatlock: Influence of Microstructure on Grain Refining Performance of Al-Ti-B master Alloy[].Materials Science and Technology.1993
  • 8A Cibula.The Mechanism of Grain Refinement of Sand Casting in Aluminum Alloys[].J Inst Metals.1949

同被引文献35

引证文献4

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部