期刊文献+

Temperature Drop Model Based on Discrete Element Method for Simulating Damage of Bio-Cemented Sand by Cold Wave

Temperature Drop Model Based on Discrete Element Method for Simulating Damage of Bio-Cemented Sand by Cold Wave
原文传递
导出
摘要 The microbially cemented sand(MCS)material is a new building material with a broad research prospect,although the nationwide cold wave affects the mechanical properties of the material in the practical application.The microstructure of MCS is obtained by computed tomography(CT)and scanning electron microscope(SEM);the thermodynamic mathematical model is established by considering the particle shapes and bonding state based on direct element method(DEM).By studying the damage of temperature drop amplitude and cooling duration to MCS material under the effect of cold wave,the following conclusions are drawn.For a given temperature drop range,an increased cooling time can aggravate the material damage.In addition,a rapid drop in temperature can cause serious damage to the material.The cracks generated by the temperature stress propagate in the direction of the weaker component of the material.The DEM model can be better used to analyze the damage of the MCS structure induced by cold wave. The microbially cemented sand(MCS) material is a new building material with a broad research prospect, although the nationwide cold wave affects the mechanical properties of the material in the practical application. The microstructure of MCS is obtained by computed tomography(CT) and scanning electron microscope(SEM); the thermodynamic mathematical model is established by considering the particle shapes and bonding state based on direct element method(DEM). By studying the damage of temperature drop amplitude and cooling duration to MCS material under the effect of cold wave, the following conclusions are drawn. For a given temperature drop range, an increased cooling time can aggravate the material damage. In addition, a rapid drop in temperature can cause serious damage to the material. The cracks generated by the temperature stress propagate in the direction of the weaker component of the material. The DEM model can be better used to analyze the damage of the MCS structure induced by cold wave.
作者 DUAN Yu KIM Cholgyong XU Guobin 段宇;金哲景;徐国宾(State Key Laboratory of Hydraulic Engineering Simulation and Safety,Tianjin University,Tianjin 300350,China;School of Civil Engineering,Tianjin University,Tianjin 300350,China;School of hydraulic Engineering,Hydraulic and Dynamic of Hamhung University,Hamhung,DPRK)
出处 《Journal of Shanghai Jiaotong university(Science)》 EI 2019年第6期789-798,共10页 上海交通大学学报(英文版)
基金 Foundation item:the National Natural Science Foundation of China(No.51621096)
关键词 cold wave microbial-induced calcium carbonate precipitation(MICP) CALCITE discrete element method(DEM) crack cold wave microbial-induced calcium carbonate precipitation(MICP) calcite discrete element method(DEM) crack
  • 相关文献

参考文献4

二级参考文献38

  • 1杨光华,袁明道.MgO微膨胀混凝土自生体积变形的双曲线模型[J].水力发电学报,2004,23(4):38-44. 被引量:13
  • 2王立华,陈理达.长沙拱坝外掺MgO混凝土材料性能试验研究[J].广东水利水电,2004(6):23-24. 被引量:3
  • 3杨家修.普定碾压混凝土拱坝防裂结构设计[J].水力发电,1995,22(10):26-28. 被引量:3
  • 4周伟,常晓林,刘杏红,范五一,丁福珍.基于温度应力仿真分析的碾压混凝土重力坝诱导缝开裂研究[J].岩石力学与工程学报,2006,25(1):122-127. 被引量:19
  • 5唐欣薇.基于宏细观力学的混凝土破损行为研究[D].北京:清华大学,2008.
  • 6Andersson JC, Martin CD, Stille H. The Aspo Pillar Stability Experiment. Part 11. Rock mass response to coupled excavation-induced and thermal-induced stresses. International Journal of Rock Mechanics and Mining Sciences 2009;46(5):8?9-95.
  • 7Andersson JC, Martin CD. The ,Aspo Pillar Stability Experiment. Part I. Experi- ment design. International Journal of Rock Mechanics and Mining Sciences 2009;46(5):865-78.
  • 8Andersson JC. Aspo Pillar Stability Experiment final report: rock response to cou- pled mechanical thermal loading. Stockholm: Swedish Nuclear Fuel and Waste Management Co. (SKB); 2007.
  • 9Chijimatsu M, Fujita T, Kobayashi A, Nakano M. Experiment and validation of numer- ical simulation of coupled thermal, hydraulic and mechanical behaviour in the engineered buffer materials. International Journal for Numerical and Analytical Methods in Geomechanics 2000a;24(4):403-24.
  • 10Chijimatsu M, Fujita T, Kobayashi A, Nakano M. Calibration and validation of thermal, hydraulic and mechanical model for buffer material. JNC technical report JNC TW8400 98-017. Tokai: JNC: 1998.

共引文献22

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部