摘要
研究了粉煤灰添加适量助熔剂NaOH进行焙烧,再用浓盐酸浸出铝,考察了NaOH加入量、焙烧温度、焙烧时间及盐酸用量对铝溶出率的影响。结果表明:针对0.5g粉煤灰,在NaOH加入量5g、270℃条件下焙烧30min,之后用25mL浓盐酸浸出,铝溶出率达97%,溶出效果较好。
The roasting of fly ash with NaOH as cosolvent at high temperature and dissolving aluminum using hydrochloric acid were studied.The effects of NaOH dosage,roasting temperature,roasting time and hydrochloric acid dosage on dissolution rate of aluminium were investigated.The results show that for 0.5 g fly ash,under the conditions of NaOH mass of 5 g and temperature of 270℃,roasting for 30 min,then leaching using 25 mL concentrated hydrochloric acid,the dissolving rate of aluminium reaches 97%,the leaching effect is better.
作者
胡小龙
陈炜
孙志娟
王强
HU Xiaolong;CHEN Wei;SUN Zhijuan;WANG Qiang(Metallurgical&Material Engineering Department,Inner Mongolia Technical College of Mechanics and Electrics,Huhehot 010070,China)
出处
《湿法冶金》
CAS
北大核心
2020年第1期23-25,共3页
Hydrometallurgy of China
基金
内蒙古教育厅课题(NJZY18275)
内蒙古机电职业技术学院课题(NJDZJZR1702,NJDZJ1625)
关键词
粉煤灰
焙烧
盐酸
铝
溶出
fly ash
roasting
hydrochloric acid
aluminum
dissolving
