摘要
自制氟硅改性聚丙烯酸酯乳液(Vi-PVFDPA)并应用于液体分散染料免水洗印花,研究了乳液用量、焙烘温度及时间对印花效果的影响。结果表明:在液体分散蓝WCD-HGL用量2%,增稠剂TF-312D用量2%,Vi-PVFDPA乳液用量12%,焙烘温度190℃,焙烘时间3 min的工艺条件下,耐湿摩擦色牢度达到3~4级。液体分散蓝WCD-HGL免水洗印花后织物性能基本达到了粉体分散蓝HGL水洗后的效果,但得色量更高。
The self-made fluorosilicon modified polyacrylate emulsion(Vi-PVFDPA)was used in water-free printing with liquid disperse dyes.The effects of Vi-PVFDPA emulsion dosage,curing temperature and curing time on printing effect were studied.The results showed that when the dosage of liquid disperse blue WCD-HGL was 2%,and the dosage of thickener TF-312 D was 2%,the dosage of Vi-PVFDPA emulsion was 12%,then the curing temperature was 190℃and the curing time was 3 min,the wet rubbing fastness could reach 3-4 grade.The fabric properties printed with liquid disperse blue WCD-HGL water-free washing process basically reached the effect of those with powder disperse blue HGL water washing process,but the color yield was higher.
作者
郦少奇
蒋慧
姜建堂
张超民
王雪峰
沈一峰
LI Shao-qi;JIANG Hui;JIANG Jian-tang;ZHANG Chao-min;WANG Xue-feng;SHEN Yi-feng(College of Textile Science and Engineering,Zhejiang University of Technology(International Silk College),Hangzhou 310018,Zhejiang China;Laimei Technology Co.,Ltd.,Changxing 313100,Zhejiang China;Transfar Zhilian C o.,Ltd.,Hangzhou 311215,Zhejiang China)
出处
《染料与染色》
CAS
2019年第6期35-38,共4页
Dyestuffs and Coloration
关键词
液体分散染料
免水洗
印花
色牢度
氟硅改性聚丙烯酸酯
liquid disperse dye
washing free
printing
color fastness
fluorosilicon modified polyacrylate
