期刊文献+

曲轴箱通风系统油气分离器性能试验研究 被引量:9

Experimental Study on Oil-Gas Separator Performance of Crankcase Ventilation System
下载PDF
导出
摘要 对某增压汽油发动机曲轴箱通风系统原理进行了阐述,进行了漏气流量、新鲜空气补充量、机油携带量、机油消耗试验。概括性地介绍了台架测量油气分离器机油携带量的方法,测量了在不同漏气流量、油气分离器精分离小孔数量下油气分离器的机油携带量水平差异。同时,在油气分离器机油携带量试验过程中发现,油气分离器精分离回油通道上回油单向阀的反向截止功能是否可靠将直接影响油气分离器机油携带量试验的成败。油气分离器机油携带量试验结果表明,匹配所设计的油气分离器,在单双倍活塞漏气流量情况下,油气分离器的机油携带量水平满足设计目标要求。当油气分离器精分离小孔数量为4时,油气分离器具有更优的机油携带量水平。 he principle of crankcase ventilation system for a turbocharged gasoline engine was expounded.The blow-by flow,fresh air supplement,oil carry-over amount,and oil consumption tests were conducted.The bench measuring method of oil carry-over amount for oil-gas separator was generally introduced and the oil carry-over amount difference was measured under different blow-by flows and numbers of oil-gas separator fine separation hole.It was found that during the process of experiment whether the reverse cut-off function of oil return check valve on the oil return channel of oil-gas separator was reliable or not would directly affect the test result.The test results show that the oil carry-over amount of the designed oil-gas separator can meet the design requirements under the condition of single or double blow-by flow.And the overall oil carry-over amount achieves a high level when the number of fine separation hole is 4.
作者 程霖 谭建松 杨帆 兰燕杰 CHENG Lin;TAN Jiansong;YANG Fan;LAN Yanjie(Power Center,BAIC Motor Powertrain Co.,Ltd.,Beijing 101106,China)
出处 《车用发动机》 北大核心 2020年第1期38-43,共6页 Vehicle Engine
关键词 曲轴箱 通风系统 油气分离器 机油携带量 回油单向阀 crankcase ventilation system oil-gas separator oil carry-over amount return check valve
  • 相关文献

参考文献7

二级参考文献38

  • 1洪诚.发动机曲轴箱通风系统调压阀特性的试验研究[J].现代车用动力,2009(2):25-27. 被引量:5
  • 2吴望一.流体力学[M].北京:北京大学出版社,2004.
  • 3蒋明德.高等内燃机原理[M].西安:西安交通大学出版社,2002.
  • 4陈之航.气液两相流动和传热[M].北京:机械工业出版社,1983.
  • 5Clark N N,Tatli E,Barnett R,et al.Characterization and abatement of diesel crankcase emissions[C]//SAE 2006-01-3372,2006.
  • 6Ebner W,Jaschek A O.Die blow-by-messung-anforderungen und meβprinzipien[J].MTZ,1998,59(2):90-95.
  • 7Pagnozzi R M,Pereira D C,Spielmann L,et al.Methodology applied on the validation of air/oil separation systems integrated to the crankcase ventilation valve[C]//SAE 2007-01-2757,2007.
  • 8Kissner G.Highly efficient oil separation systems for crankcase ventilation[C]//SAE 2009-01-0974,2009.
  • 9Gokten M.The development of high efficiency crankcase ventilation and oil mist separator for a heavy-duty diesel application[C]//SAE 2008-01-2687,2008.
  • 10Zink A,Piesche H M,Trautmann P,et al.Numerical and experimental investigations of a disc stack centrifuge used as an oil mist separator for automotive applications[C]//SAE 2004-01-0638,2004.

共引文献72

同被引文献44

引证文献9

二级引证文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部