期刊文献+

动力保持型AMT带式制动器的动态力矩特性 被引量:1

Dynamic torque characteristics of the band brake of a continuous automatic transmission
原文传递
导出
摘要 带式制动器是动力保持型自动变速器(AMT)的换挡执行元件,其中制动带的动态力矩特性对于换挡品质至关重要。为探寻动态制动力矩与制动力的关系,该文建立了制动带静力学模型和有限元模型,设计了带式制动器样机实验台架,完成了制动鼓正反转实验,将实验结果与仿真计算结果进行了对比分析,结果表明:动态制动力矩是转速、正压力、动态摩擦系数共同作用的结果;制动鼓正转时,制动带有增力效应,制动带所产生的制动力矩较大,静态区持续时间长,制动稳定性好,而反转时无明显的静态区,线性度好,对控制有利。根据实验结果拟合得到制动带动态力矩经验公式的控制参数,可用于制动带的平滑控制。 A band brake is the shift actuator in a continuous automatic transmission with the band brake dynamics significantly influencing the shift quality. A static model, a finite element model and tests were used to investigate the relationship between the brake torque and the braking force. Tests of a brake drum rotated clockwise and counterclockwise were compared with simulations. The results show that the dynamic braking torque is related to the rotational speed, normal force and dynamic friction coefficient. When the brake drum is rotated forward, the self-energy effect increases the braking torque generated by the brake band with a longer static zone and better braking stability. When the drum is reversed, there is no obvious static zone, while the relationship is more linear and suitable for control. The test results are used to define the control parameters of the empirical equation for the dynamic brake band braking torque for smooth control of the brake band.
作者 李飞 宋健 方圣楠 卢正弘 NGUYEN Truong Sinh LI Fei;SONG Jian;FANG Shengnan;LU Zhenghong;NGUYEN Truong Sinh(State Key Laboratory of Automotive Safety and Energy,Tsinghua University.Beijing 100084,China;Department of Mechanized Infantry,Shijiazhuang School of Army Infantry Academy,Shijiazhuang 050083,China)
出处 《清华大学学报(自然科学版)》 EI CAS CSCD 北大核心 2020年第2期124-131,共8页 Journal of Tsinghua University(Science and Technology)
关键词 带式制动器 制动带 动态力矩特性 动力保持型自动变速器 band brake brake band dynamic torque characteristics continuous automatic transmission
  • 相关文献

参考文献3

二级参考文献13

  • 1马迅,秦剑.制动鼓的热-结构耦合分析[J].湖北汽车工业学院学报,2004,18(3):5-9. 被引量:12
  • 2王玉亭.大型带式制动器设计与制造[J].起重运输机械,1995(8):9-13. 被引量:4
  • 3杨耀峰,吴春英.带式制动器的理论分析和设计[J].西北轻工业学院学报,1995,13(3):27-30. 被引量:6
  • 4薛闯,贾建军,舒嵘,王建宇.装配体结构有限元分析中的螺钉连接模型[J].科学技术与工程,2006,6(7):825-828. 被引量:22
  • 5Jianqun Gao, Si.C.lee, Xiao-lan Ai, et al. An FFT-based Wansient flash temperature model for general three- dimensional rough surface contacts [J]. ASME Journal of Tribology, 2000, 122: 519-523.
  • 6M. H. Refaat, S. A. Mequid. A new strategy for the solution of frictional contact problems[J]. Int.J Number Meth Engng, 1998, 43: 1053-1068.
  • 7成大先.机械设计手册[M].北京:化学工业出版社,2002..
  • 8卜炎.机械传动装置设计手册[M].北京:机械工业出版社,1998..
  • 9詹宗勉.工程热力学和传热学[M].大连:大连海事大学出版社,1995.
  • 10Kwanglm Lee. Numerical Prediction of Brake Fluid Temperature Rise During Braking and Heat Soaking [A]. Heat Transfer-A Basic Approach [C]. McGraw-Hill Book Company, 1985.1999-01-1483.

共引文献7

同被引文献1

引证文献1

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部