摘要
随着新能源汽车车身轻量化的发展,铝合金复合材料在车身上逐渐被采用。由于传统焊接不适用于铝合金材料的连接,自冲铆接技术在全铝车身上的应用得到了重视。自冲铆接技术是一种冷连接技术,多片材料无需预先穿孔即可连接在一起。因此,研究自冲铆接工艺的接头性能和质量对车身轻量化有着重要的意义。基于国内外自冲铆接技术的发展现状,综合评述了接头性能的评价参数,归纳了铆钉、凹模、冲头和板料工艺参数对接头性能影响的特点,分析了其关键作用和优先程度,可用于指导自冲铆接技术工艺的开发过程。此外,通过对国外根据工艺参数对接头几何性能和抗剪强度进行预测的方法的总结,分析了国内与国外在强度预测方面存在的差距,提出了我国自冲铆接技术进一步研究的方向。
With the development of new energy vehicle body lightweight,aluminum alloy composite materials have been gradually used in car body.Because traditional welding was not suitable for the connection of aluminum alloy materials,the application of self-piercing riveting technology in all aluminum body became a key direction of research and development.Self-piercing riveting technology was a kind of cold joining technologies,many pieces of materials can be joined together without pre-perforation.Therefore,the research on the joint performance and quality of self-piercing riveting technology was of great significance to the body lightweight.Based on developing situation of self-piercing riveting technology at home and abroad,the basic principle and joint performance evaluation parameters of semi hollow self-piercing riveting were summarized.The influence of technological parameters on riveting performance was described including rivets,dies,punches,plates and other parts in the process of riveting.It was pointed out that the selection of technological parameters is important for the quality of joints.Besides,the method for predicting the geometric properties and shear strength of joints were summarized and analyzed.With further researches on the technological parameters of self-piercing riveting,the independent research and development capabilities of self-piercing riveting technology will be promoted,which can speed up the process of new energy vehicle body lightweight in China.
作者
杜爱民
陈垚伊
朱忠攀
邹李潇
DU Aimin;CHEN Yaoyi;ZHU Zhongpan;ZOU Lixiao(School of Automotive Studies,Tongji University,Shanghai 201804,China)
出处
《新技术新工艺》
2020年第4期1-7,共7页
New Technology & New Process
基金
国家重点研发计划项目(2017YFB1303501)。
关键词
车身轻量化
全铝车身
半空心自冲铆接
工艺参数
铆接质量
接头强度
lightweight vehicle body
all aluminum vehicle body
semi hollow self-piercing riveting
process parameters
riveting quality
joint strength
