期刊文献+

Trap distribution of polymeric materials and its effect on surface flashover in vacuum 被引量:2

下载PDF
导出
摘要 The surface trap parameter can significantly affect the development of surface flashover in vacuum,but the effective mode and mechanism are not very clear yet.The trap parameters of three polymeric materials were tested and calculated by means of isothermal surface potential decay.The flashover experiment was developed under different applied voltages.The results show a positive correlation between the withstand voltage and the deep trap,i.e.,the deeper trap energy level is,the higher flashover voltage is.The dynamics process of charge trapping and detrapping was analyzed based on the charge transport model in dielectrics with a single trap level and two discrete trap levels.The time of charge trapping was compared with that of the discharge development.The results show that the charge trapping time is longer than the flashover development time.The way to influence flashover for a trap is not to decrease the secondary electrons in single discharge development,but to change the electric field distribution on the dielectric surface by charge capture.
作者 任成燕 张传升 胡多 章程 孔飞 邵涛 严萍 Chengyan REN;Chuansheng ZHANG;Duo HU;Cheng ZHANG(;Fei KONG;Tao SHAO;Ping YAN(Key Laboratory of Power Electronics and Electric Drive,Institute of Electrical Engineering,Chinese Academy of Sciences,Beijing 100190,People’s Republic of China;University of Chinese Academy of Sciences,Beijing 100049,People's Republic of China;Northeast Electric Power Design Institute of China Power Engineering Consulting Group Corporation,Changchun 130021,People’s Republic of China)
出处 《Plasma Science and Technology》 SCIE EI CAS CSCD 2020年第4期8-14,共7页 等离子体科学和技术(英文版)
基金 supported by National Natural Science Foundation of China(Nos.51977202,U1830135,51807189) the Scientific Instrument Developing Project of the Chinese Academy of Sciences(No.YJKYYQ20170004).
  • 相关文献

同被引文献24

引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部