摘要
为了研究深冷处理对H13热作模具钢热稳定性的影响及组织演化规律,利用洛氏硬度计、X射线衍射仪、扫描电子显微镜及透射电子显微镜等对经不同热处理工艺处理后H13热作模具钢的热稳定性及显微组织进行了表征。结果表明,深冷处理促使部分残余奥氏体转变为马氏体,导致深冷处理后试验钢的硬度高于淬火态试验钢的硬度。经深冷处理后试验钢在540℃回火20h过程中其硬度均比常规热处理的试验钢硬度高,深冷处理的试验钢具有更好的热稳定性。与常规热处理的试验钢相比,深冷处理促使钢中碳原子偏聚并在回火过程中以碳化物的形式析出,导致深冷处理的试验钢回火后马氏体基体中碳的质量分数降低。透射电镜结果显示,试验钢在回火过程中析出的大量弥散分布的纳米级M23C6型碳化物,经长时间回火后碳化物粗化致使试验钢硬度随着回火时间的增加而下降。
In order to study the effect of deep cryogenic treatment on the thermal stability and microstructure evolution of H13hot work mold steel,the thermal stability and microstructure evolution of H13 hot work mold steel treated by different heat treatment processes were characterized by Rockwell hardness tester,X-ray diffractometer,scanning electron microscope and transmission electron microscope.The results show that the deep cryogenic treatment promotes the transformation of the retained austenite to martensite,which resulted in the hardness of the tested steel subjected to deep cryogenic treatment is higher than that of the quenched tested steel.In addition,after deep cryogenic treatment,the hardness of the tested steel during tempering at 540℃ for 20his higher than that of the conventional heat treatment tested steel,and the cryogenically treated tested steel has better thermal stability too.Compared with the conventional heat-treatment tested steel,the deep cryogenic treatment promotes the segregation of carbon atoms in the steel and precipitates as carbides during the tempering process,thus the carbon content in the martensite matrix after tempering of the cryogenically treated tested steel is less than the conventional heat treatment.Moreover,the results of transmission electron microscopy showed that a large number of dispersed nano-scale M23C6 carbides precipitated during the tempering process of the tested steel.After a long time of tempering,the carbide coarsening caused the hardness of the tested steel to decrease with the increase of tempering time.
作者
李东辉
肖茂果
孙浩
何文超
张旭
李绍宏
LI Dong-hui;XIAO Mao-guo;SUN Hao;HE Wen-chao;ZHANG Xu;LI Shao-hong(School of Materials Science and Engineering,Kunming University of Science and Technology,Kunming 650093,Yunnan,China)
出处
《钢铁》
CAS
CSCD
北大核心
2020年第2期95-102,118,共9页
Iron and Steel
基金
国家自然科学基金资助项目(51761022)。
关键词
H13钢
深冷处理
硬度
残余奥氏体
碳化物
H13steel
deep cryogenic treatment
hardness
retained austenite
carbide
