期刊文献+

不锈钢材料氮化层表面磨削技术研究 被引量:2

Research on Surface Grinding Technology of Nitriding Layer of Stainless Steel
原文传递
导出
摘要 本文针对1Cr11Ni2W2MoV材料氮化表面磨削容易出现麻点问题,通过对渗氮方法、径向进给量、磨削余量3个因素进行对比试验。对不同状态下的磨削表面进行表面微观形貌分析,检测不同条件下对零件表面质量、硬度、表面粗糙度等指标,得出最优零件氮化工艺以及磨削参数。 The nitriding surface grinding of 1Cr11Ni2W2MoV material was prone to pitting problems.The nitriding method,radial feed and grinding allowance were compared.The surface microstructure of the grinding surface under different conditions was analyzed.The parameters of the surface quality,hardness and roughness of the parts under different conditions were detected.
作者 秦诗凡 向珊 鲁攀 张霞 QIN Shi-fan;XIANG Shan;LU Pan(AECC South Industry CO.,LTD.,Zhuzhou 412003)
出处 《航空精密制造技术》 2020年第2期11-13,共3页 Aviation Precision Manufacturing Technology
关键词 氮化层 外圆磨削 麻点 磨削参数 优化 nitriding layer cylindrical grinding pitting grinding parameter optimization
  • 相关文献

参考文献1

二级参考文献17

  • 1刘菊东,王贵成.基于磨削加工的表面形变淬火工艺——磨削淬硬[J].工具技术,2004,38(7):11-14. 被引量:24
  • 2刘菊东,王贵成,陈康敏,贾志宏.非淬硬钢磨削表面硬化层的试验研究[J].中国机械工程,2005,16(11):1013-1017. 被引量:29
  • 3Mahdi M, Zhang L. Correlation between grinding conditions and phase transformation of an alloy steel, in: L C Wrobel et al. (Eds.), Advanced computational methods in heat transfer III, Computational Mechanics Pubhcations, Southampton, 1994:193 - 200.
  • 4Mahdi M, Zhang L. The finite element thermal analysis of grinding processes by ADINA. Computer and Structure, 1995, 56:313 - 320.
  • 5Zhang L, Mahdi M. Applied Mechanics in Grinding, Part 4, Part 6, Part 7.
  • 6Shaw M C, Vyas A. Heat-affected zones in grinding steel. Annals of the CIRP, 1994, 43 (1) : 279 - 282.
  • 7Brinksmeier E, Brockhoff T. Randschicht-W rmebehandlung dursh Schleifen. H erterei-Technische Mitteilungen, 1994, 49 (5) : 327 - 330.
  • 8Brockhoff T. Grinding-hardening: A comprehensive view. Annals of the CIRP, 1999,48(1) : 255 - 260.
  • 9Brinksmeier E, Brockhoff T. Utilization of grinding heat as a new heat treatment process. Annals of the CIRP, 1996,45( 1 ): 283 - 286.
  • 10Brinksmeier E, Brockhoff T. Surface heat treatment by using advanced grinding processes. Metallurgia Italiana, 1999, 91 (4) : 19 - 23.

同被引文献10

引证文献2

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部