摘要
Direct growth and patterning of atomically thin two-dimensional(2D)materials on various substrates are essential steps towards enabling their potential for use in the next generation of electronic and optoelectronic devices.The conventional gas-phase growth techniques,however,are not compatible with direct patterning processes.Similarly,the condensed-phase methods,based on metal oxide deposition and chalcogenization processes,require lengthy processing times and high temperatures.Here,a novel self-limiting laser crystallization process for direct crystallization and patterning of 2D materials is demonstrated.It takes advantage of significant differences between the optical properties of the amorphous and crystalline phases.Pulsed laser deposition is used to deposit a thin layer of stoichiometric amorphous molybdenum disulfide(MoS2)film(∼3 nm)onto the fused silica substrates.A tunable nanosecond infrared(IR)laser(1064 nm)is then employed to couple a precise amount of power and number of pulses into the amorphous materials for controlled crystallization and direct writing processes.The IR laser interaction with the amorphous layer results in fast heating,crystallization,and/or evaporation of the materials within a narrow processing window.However,reduction of the midgap and defect states in the as crystallized layers decreases the laser coupling efficiency leading to higher tolerance to process parameters.The deliberate design of such laser 2D material interactions allows the selflimiting crystallization phenomena to occur with increased quality and a much broader processing window.This unique laser processing approach allows high-quality crystallization,direct writing,patterning,and the integration of various 2D materials into future functional devices.
基金
This work is supported by the Intermural Grant Program(IGP)at Auburn University.
