期刊文献+

挠性基板光电互联结构的热应力可靠性研究 被引量:3

Study on Reliability of Photoelectric Structure in Flexible Printed Circuit Board under Thermal Stress
下载PDF
导出
摘要 为了研究挠性光电互联结构在实际工程应用中的可靠性,建立了埋入光纤挠性基板光电互联结构有限元模型,根据光器件Telcordia GR-468标准加载热循环试验条件,对光电互联结构中的焊点应力、光纤应力和光电耦合效率进行仿真分析。热-结构仿真结果表明,焊点和光纤的最大等效应力均在安全范围内,光电耦合产生的最大损耗为0.7 dB,光电传输未受到显著影响,可以判定挠性光电互联结构在标准热循环作用下能够保证光电传输的稳定性。 In order to study the reliability of the flexible optoelectronic interconnect structure in practical engineering applications, a finite element model of the optoelectronic interconnect structure with optical fiber embedded in flexible substrate is established. According to the optical device standard Telcordia GR-468, thermal cycle is loaded. The solder joint stress, fiber stress and optocoupler efficiency is analyzed in the optoelectronic interconnect structure. The results show that the maximum equivalent stress of the solder joint and the optical fiber is in the safe range under the thermal-structure analysis. The maximum photoelectric coupling loss is 0.7 dB, which indicates that the effect of photoelectric transmission is not significant. It can be determined that the photoelectric interconnect structure in flexible printed circuit board can ensure the stability of photoelectric transmission under the load of thermal cycle.
作者 聂国健 于迪 雷庭 李欣荣 杨云 NIE Guo-jian;YU Di;LEI Ting;LI Xin-rong;YANG Yun(The Fifth Electronics Research Institute of the Ministry of Industry and Information Technology,Guangzhou 510610,China)
出处 《光通信研究》 北大核心 2020年第4期58-61,共4页 Study on Optical Communications
关键词 光电互联结构 挠性基板 热应力 可靠性 photoelectric interconnection structure flexible printed circuit board thermal stress reliability
  • 相关文献

参考文献5

二级参考文献20

  • 1黄春跃,周德俭,吴兆华.基于正交试验设计的塑封球栅阵列器件焊点工艺参数与可靠性关系研究[J].电子学报,2005,33(5):788-792. 被引量:14
  • 2Nikolaos Bamiedakis, Aeffendi Hashim, et al. Low-cost PCB- integrated 10-Gb/s optical transceiver built with a novel inte- gration method[ J]. IEEE Transactions on Components, Packag- ing and Manufacturing Technology,2013,3(4) :592 - 600.
  • 3Nieweglowski K. Novel optical transmitter and receiver for par- allel optical interconnects on PCB-level [ A ]. 2008 2nd Elec- tronics Systemintegration Technology Conference [ C ]. Piscat- away,NJ, USA: IEEE Press, 2008.607 - 612.
  • 4Nieweglowski K. Assembly requirements for multi-channel cou- pling micro-optics in board-level optical interconnects[ A] .2010 3rd Electronics System Integration Technology Conference ( ESTC 2010) [ C ]. Piscataway, NJ, USA: IEEE Press, 2010.1 -6.
  • 5Akbari S A. An optical subassembly model based on silicon op- tical bench for VCSEL to MMF and PIN photodiode to MMF coupling[ A] .2012 Sixth International Symposium on Telecom- mtmications(IST) [ C]. New York: IEEE Press, 2012. 514 - 519.
  • 6TAO Qing, LUO Feng-guang, CAO Lei, et al. Relative power loss of misalignment based on electro-optical printed circuit board[J]. Optic,2011,122(18) :1603 - 1606.
  • 7TAO Qing, LUO Feng-guang, ZHANG Jin-xing, et al. Analysis of fabrication tolerance based on uneven thickness of SuB-pho- to-resist[ J]. Journal of Optical Technology, 2013,80 (5) : 329 -331.
  • 8Hideyuki Nasu, Kazuya Nagashim, Yozo Ishikawa. Sn-Ag-Cu solder reflow-capable 28-Gb/s x 4-channel high-density paral- lel-optical modules [ J ]. Journal of Lightwave Technology, 2013,31(24) :4111 - 4118.
  • 9韩双利,赵尚宏,底翔.新型战机综合航电系统及其高速光互连技术[J].激光与光电子学进展,2008,45(3):50-55. 被引量:10
  • 10王国富,尚小梅,陈丙炎,陈良益.星载经纬仪主要结构件的有限元分析[J].光子学报,2008,37(7):1450-1454. 被引量:3

共引文献17

同被引文献29

引证文献3

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部