期刊文献+

基于肘部自运动的主从异构7自由度机械臂运动映射及其几何逆解 被引量:12

Master-slave 7-DOF Manipulator Motion Mapping Based on Elbow Self-motion and Its Analytical Geometric Inverse Kinematics
原文传递
导出
摘要 为了在异构遥操作系统中将主臂运动信息完整的映射到从臂,以人臂运动特性为依据,针对7自由度机器人提出了一种新的主从运动学映射方法。该方法以机器人末端位姿和自转角为基础,建立主从映射矩阵。提出关节融合策略,对因有偏置而无法汇交成肩肘腕点的机器人进行关节融合,从而形成等效肩肘腕点,并以此确定映射矩阵参数。建立参考坐标系,对遥操作过程中产生的基系漂移误差进行修正。针对肘或腕不汇交的7自由度机器人,提出了一种新的逆运动学求解方法。该方法利用几何关系求解等效肩肘腕点的位置,并依据各等效点与各关节点之间的关系求解各关节角。仿真和试验结果证明了所提出的映射方法能够使从臂按照主臂所提供的信息在等比例模型中完成运动,并且在运动过程中从臂自转角与主臂相同,完成避障任务。 In order to completely map the motion information of the master arm to the slave arm in the heterogeneous teleoperation system, a new kinematics mapping method for seven degrees of freedom(DOF) robot was proposed based on the motion characteristics of the human arm. This method establishes master-slave mapping matrix based on the pose of the robot’s end effector. A joint fusion strategy is proposed to perform joint fusion on a robot that cannot be merged into a shoulder and elbow wrist point due to offset, thereby forming an equivalent shoulder, elbow, wrist point, and determine the parameters of the mapping matrix. A reference coordinate system is established to correct the base drift error generated during teleoperation. A new inverse kinematics method is proposed for a 7-DOF robot with elbow or wrist not meeting. The method uses geometric relations to solve the position of the equivalent shoulder and elbow wrist points, and solves the joint angles according to the relationship between each equivalent point and each joint point. The simulation and experimental results show that the proposed mapping method can make the slave arm complete the motion in the proportional model according to the information provided by the main arm, and at the same time, the arm rotation angle is the same as that of the main arm during the motion, and the obstacle avoidance task is completed.
作者 赵京 王鑫 张自强 龚世秋 李晓辉 ZHAO Jing;WANG Xin;ZHANG Ziqiang;GONG Shiqiu;LI Xiaohui(College of Mechanical Engineering and Applied Electronics Technology,Beijing University of Technology,Beijing 100124;Beijing Institute of Control Engineering,Beijing 100094)
出处 《机械工程学报》 EI CAS CSCD 北大核心 2020年第15期181-190,共10页 Journal of Mechanical Engineering
基金 北京市自然科学基金(3202004) 国家自然科学基金(51975008)资助项目。
关键词 运动映射方法 关节融合策略 运动学逆解 7自由度机器人 肘部自运动 kinematic mapping method joint fusion strategy inverse kinematics 7-DOF humanoid manipulator elbow self-motion
  • 相关文献

参考文献4

二级参考文献42

  • 1祖迪,吴镇炜,谈大龙.一种冗余机器人逆运动学求解的有效方法[J].机械工程学报,2005,41(6):71-75. 被引量:50
  • 2李醒飞,杨晶晶,张晨阳,张国雄,卢志扬.利用肌电信号离线控制机械臂[J].机械工程学报,2006,42(3):166-170. 被引量:3
  • 3[1]Cheng F T, Chen T H, Sun Y Y. Resolving manipulator redundancy under inequality constraints. IEEE Trans. on Robotics and Automation, 1994, 10(1): 65~71
  • 4[2]Mao Z Q, Hsia T C. Obstacle avoidance inverse kinematics solution of redundant robots by neural networks. Robotica, 1997, 15(1): 3~10
  • 5[3]Cheng F T, Shih M S. Multiple-goal priority considerations of redundant manipulators. Robotica, 1997, 15(6): 675~691
  • 6[4]Cleary K. Incorporating multiple criteria in the operation of redundant manipulators. In: Proc. 1990 IEEE Int. Conf. Robotics and Auto., 1990: 618~624
  • 7[5]Palm R. Control of a redundant manipulators using fuzzy rules. Fuzzy Sets and System, 1992, 8(45): 279~298
  • 8[6]Wang W, Gu M. Fuzzy logic joint path generation for kinematic redundant manipulators and multiple criteria. In: Proc. of 1994 IEEE Int. Conf. on Intelligent Robots and Systems, 1994: 649~656
  • 9[7]McGhee S, Chan T F, Dubey R C, et al. Probability-based weighting of performance criteria for a redundant manipulators. In: Proc. IEEE Int. Conf. Robotics and Auto., 1994, 3: 1 887~1 894
  • 10[8]Guez A, Ahmad Z. Solution to the inverse kinematics problem in robotics by neural networks. In: IEEE Int. Conf. on Neural Networks, 1988: 617~621

共引文献37

同被引文献85

引证文献12

二级引证文献43

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部