期刊文献+

起重链条链环断裂分析

Analysis on Lifting Chain Link Breaking
下载PDF
导出
摘要 某用直径约6mm的20Mn2钢丝材制作的长约31.65mm、宽约20.4mm的起重链环,在服役过程中发生断裂。为确定链环断裂的原因,对断裂的链环进行了宏观检验、断口分析、金相检验、力学性能检测和化学成分分析。结果表明,该链环断裂系氢脆所致。 A lifting chain link about 31.65 mm long by about 20.4 mm wide,made from 20Mn2 steel wire about 6 mm in diameter,broke in service.The broken chain link was tested for appearance,fracture pattern,microstructure,mechanical properties,and chemical composition to identify the cause for its breaking.The results show that the chain link breaking is attributed to hydrogen embrittlement.
作者 杨禹政 YANG Yuzheng(Shanghai Railway Certification Co,Ltd,Shanghai 200434,China)
出处 《热处理》 CAS 2020年第5期57-60,64,共5页 Heat Treatment
关键词 20MN2钢 起重链条链环 氢脆 20Mn2 steel lifting chain link hydrogen embrittlement
  • 相关文献

参考文献3

二级参考文献15

  • 1鲁欣武,潘志军.杭钢80t DC EAF-LF-CC工艺20Mn2链用钢盘条的试制[J].特殊钢,2005,26(6):57-58. 被引量:2
  • 2N. Narita,C. J. Altstetter,H. K. Birnbaum.Hydrogen-related phase transformations in austenitic stainless steels[J].Metallurgical Transactions A.1982(8)
  • 3Anthony W. Thompson,Otto Buck.Hydrogen effects on martensite formation[J].Metallurgical Transactions A.1976(2)
  • 4C.A.Zaffe,C.E.Sims.Hydrogen,Flakes and Shatter Cracks[].Transactions of the Metallurgical Society of AIME.1940
  • 5A.Thompson,O.Buck.Hydrogen Effects on Martensite Formation[].MetallMaterTransA.1976
  • 6P.Maulik,J.Burke.Hydrogen Induced Martensitic Trans-formations in Austenitic Steels[].Scripta Metallurgica.1975
  • 7Oriani,R A,Josephic,P H.Equilibrium aspects of hydrogen induced cracking of steels[].Acta Materialia.1974
  • 8Oriani,R. A.,Josephic,P. H.Equilibrium and kinetic studies of the hydrogen-assisted cracking in steel[].Acta Materialia.1977
  • 9Petch,N. J.,Stables,P.Delay Fracture of Metals Under Static Load[].Nature.1952
  • 10Hobson J D,Hewitt J.J Iron Steel Inst[].London Journal.1953

共引文献16

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部