摘要
通过分析汽车同步带传动噪声产生机理,指出啮合冲击噪声和横向振动噪声是汽车同步带传动噪声的主要声源。基于声阵列测量原理为ZA型汽车同步带设计了传动噪声试验装置。通过不同转速的噪声试验得到了噪声声压分布云图和传动噪声频域特性曲线,验证了汽车同步带噪声产生机理和声源位置。试验结果表明,声阵列技术用于汽车同步带传动噪声源识别准确、可靠,本研究为汽车同步带传动的噪声控制提供了理论依据。
Through the analysis on the noise generation mechanism of vehicle synchronous belt transmission,it is pointed out that the main noise sources of vehicle synchronous belt transmission are meshing impact noise and transverse vibration noise.A transmission noise test device for ZA type synchronous belt is designed based on the principle of sound array measurement.Noise tests are conducted at different speeds and the sound pressure nephogram and the frequency characteristic curve of noise are obtained,with the noise generation mechanism and sound source location of synchronous belt verified.The test results show that the noise source identification of vehicle synchronous belt transmission by using sound array technology is accurate and reliable.This study provides a theoretical basis for noise control of vehicle synchronous belt transmission.
作者
史尧臣
陈国平
李占国
唐武生
赵希禄
Shi Yaochen;Chen Guoping;Li Zhanguo;Tang Wusheng;Zhao Xilu(College of Mechanical and Vehicular Engineering,Changchun University,Changchun 130022;College of Mechanical and Electrical Engineering,Changchun University of Science and Technology,Changchun 130022;Faculty of Engineering,Saitama Institute of Technology,Fukaya 369-0293,Japan)
出处
《汽车工程》
EI
CSCD
北大核心
2020年第11期1566-1570,1576,共6页
Automotive Engineering
基金
国家教育部春晖计划(018JB301L08)
吉林省教育厅科研项目(2018LY501L03)
吉林省发改委科研项目(20190103016)资助。
关键词
同步带传动
声阵列
噪声源识别
试验研究
synchronous belt transmission
sound array
noise source identification
experimental study
