期刊文献+

不同牌号溶聚丁苯橡胶在高性能轮胎胎面胶中的应用 被引量:11

Application of Different Brand SSBR in Tread Compound of High Performance Tire
下载PDF
导出
摘要 研究4种牌号溶聚丁苯橡胶(SSBR)在高性能轮胎胎面胶中的应用。结果表明:SSBR5251H胶料的门尼粘度较小,加工性能较好,回弹值最大,耐磨性能最好,滚动阻力最小;与SSBR5251H胶料相比,SSBR5360H和SSBR5271H胶料的300%定伸应力增大,回弹值减小,耐磨性能下降,SSBR5360H胶料具有最佳的抗湿滑性能,SSBR5271H胶料具有良好的抗湿滑性能和较低的滚动阻力;SSBR6440H胶料的门尼粘度最大,门尼焦烧时间最短,拉伸强度和撕裂强度最大,耐磨性能良好,与SSBR5271H胶料相比,其玻璃化温度相同,0℃时的损耗因子减小,60℃时的损耗因子和压缩疲劳温升增大,具有较高的滚动阻力和生热。 The application of four brands of solution polymerized styrene butadiene rubber(SSBR)in the tread compound of high performance tire was investigated.The results showed that,the Mooney viscosity of the SSBR5251H compound was low,the processability was good,the rebound value was the largest,the wear resistance was the best,and the rolling resistance was the lowest.Compared with SSBR5251H compound,the modulus at 300%elongation of the SSBR5360H and SSBR5271H compound was higher,the rebound value and wear resistance was lower.SSBR5360H compound had the best wet skid resistance,and SSBR5271H compound had good wet skid resistance and low rolling resistance.The Mooney viscosity of the SSBR6440H compound was the highest,the Mooney scorch time was the shortest,the tensile strength and tear strength were the highest,and the wear resistance was good.Compared with SSBR5271H compound,the glass transition temperature of the SSBR6440H compound was the same,the loss factor at 0℃was lower,the loss factor at 60℃and compression fatigue temperature rise was higher,indicating that it possessed higher rolling resistance and heat build-up.
作者 张静 黄义钢 张锡熙 孙钲 王子琪 ZHANG Jing;HUANG Yigang;ZHANG Xixi;SUN Zheng;WANG Ziqi(Qingdao Doublestar Tyre Industry Co.,Ltd,Qingdao 266400,China)
出处 《轮胎工业》 CAS 2020年第12期730-734,共5页 Tire Industry
关键词 溶聚丁苯橡胶 高性能轮胎 胎面胶 抗湿滑性能 滚动阻力 耐磨性能 填料网络 SSBR high performance tire tread compound wet skid resistance rolling resistance wear resistance filler network
  • 相关文献

参考文献6

二级参考文献40

  • 1Firestone Tire & Rubber Co. Continuous polymerization: US, 1197382[ P]. 1970-07-01.
  • 2Wilt M S. Continuous polymerization reactor: US, 4438074[P].1984-03-20.
  • 3Smith R L. Process for countering effects of fast poisons in continuous olefin polymerization : US,4239870[ P]. 1980 - 12 - 19.
  • 4Halasa A F, Prentis J, Hsu B. High vinyl high styrene solution SBR[J]. Polymer,2005,46(12) : 4166 -4174.
  • 5班锡广 金关泰.HMPA调节丁二烯阴离子聚合体系的研究.高分子材料科学与工程,1986,2(1):9-13.
  • 6代云水,张萍,赵树高.SSBR在高性能轮胎胶料中的应用[J].弹性体,2007,17(4):23-26. 被引量:22
  • 7戴立平,李花停,张建国.高乙烯SSBR的合成和性能表征[J].橡胶工业,2010.32(3):13-16.
  • 8白利强.REACH应对有术——橡胶助剂期待叩开欧盟大门[J].欧盟REACH法规应对宝典,2011(1) :18-19.
  • 9Nordsiek H. The integral rubber concept-anappproach to anideal tire tread rubber [J]. Kauts Gum Kunet,1985,38(2):178-185.
  • 10Kainradl P,Kaufmann G. Heat generation in pneumatic tire[J]. Rubber Chemistry and Technology, 1991,49:823.

共引文献126

同被引文献106

引证文献11

二级引证文献14

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部