期刊文献+

C245热轧H型钢生产开发

Development and Production of Hot-rolled C245 H-beam
下载PDF
导出
摘要 通过设计合理的化学成分以及制定冶炼、连铸、轧制工艺,提高了产品的综合性能,特别是时效冲击性能。通过试验研究,确定影响时效冲击韧性的主要因素为变形条件,温度条件对其影响不大。当变形量小于12%时,随变形量的增加,冲击韧性出现明显降低,当变形量大于12%时,冲去韧性则基本保持稳定。 By designing the reasonable chemical composition and formulating the smelting,continuous casting and rolling processes,the comprehensive properties of the products,especially the aging impact properties,were improved.Through experimental study,it was determined that,the main factor affecting the aging impact toughness was the deformation condition,and the temperature condition had little effect on it.The impact toughness decreased obviously with the increase of deformation when the deformation was less than 12%,and remained stable when the deformation was more than 12%.
作者 李超 赵培林 韩文习 Li Chao;Zhao Peilin;Han Wenxi(The Technology Center)
机构地区 技术中心
出处 《莱钢科技》 2020年第4期25-28,共4页 Laigang Science & Technology
关键词 应变时效 C245热轧H型钢 微合金化 strain aging C245 hot一rolled H一beam microalloying
  • 相关文献

参考文献1

二级参考文献7

  • 1Zhao J Z, De A K, De Cooman B C. Kinetics of Cottrell atmosphere formation during strain aging of ultra-low carbon steels. Mater Lett, 2000, 44:374
  • 2Tkalcec I, Mari D, Benoit W. Correlation between internal friction background and the concentration of carbon in solid solution in a rnartensitic steel. Mater Sci Eng, 2006, A442:471
  • 3Blanter M S, Golovin I S, Neuhauser H, et al. Internal Friction in Metallic Materials. Berlin: Springer-Verlag Berlin Heidelberg, 2007
  • 4机械工程手册、电机工程手册编辑委员会.机械工程手册:工程材料卷.2版.北京:机械工业出版社.1996
  • 5鲁晓声.14MnVTiReA钢应变时效性能研究[J].材料开发与应用,1999,14(2):11-13. 被引量:12
  • 6于宁,戢景文.Fe-Nb-C合金的中温内耗[J].金属学报,2001,37(11):1169-1173. 被引量:8
  • 7钱匡武,李效琦,萧林钢,陈文哲,张好国,彭开萍.金属和合金中的动态应变时效现象[J].福州大学学报(自然科学版),2001,29(6):8-23. 被引量:83

共引文献7

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部