摘要
贴片式石英晶体振荡器广泛应用于各类电子和通信设备系统中。针对晶振在冲击环境中容易出现结构破坏而导致系统工作异常的问题,通过分析单自由度系统在不同频率冲击载荷作用下的响应特点,建立了结构的应力响应水平与相关冲击响应谱谱值之间的联系,获得了较已有结论更合理的损伤边界形式。根据典型晶振结构易损组件的力学特性建立对应的简化分析模型,得到了贴片晶振在大频率范围内的结构损伤边界。利用有限元仿真软件,对晶振结构在0.5~30 kHz频率范围内冲击载荷下的响应进行仿真分析,验证了该损伤边界的有效性。这也为以贴片晶振为代表的微小元器件在冲击环境下的可靠性研究提供了一种可行的方法。
The surface mounted devices(SMD)crystal oscillator is widely used in various electrical and communication equipment or systems.The crystal oscillator is prone to structural damage under shock environment,which may results in abnormal operation of the system.The relationship between the level of structural stress response and the value of related shock response spectrum(SRS)is established and a more reasonable damage boundary form is obtained by analyzing the response characteristics of the single-degreeof-freedom(SDOF)system under shock loads with different frequencies.Based on the mechanical characteristics of the vulnerable component of a typical crystal oscillator,the corresponding simplified analytical model is established,and its structural damage boundary in a large frequency range is obtained.The finite element simulation software is used to simulate the response of crystal oscillator structure under shock loads within the frequency range of 0.5-30 kHz to verify the effectiveness of the structural damage boundary.This paper also provides a feasible method for the reliability study of various micro-components represented by SMD crystal oscillator under shock environment.
作者
罗凯文
LI Q.M.
LUO Kaiwen;LI Q.M.(School of Mechatronical Engineering,Beijing Institute of Technology,Beijing 100081,China;School of Engineering,The University of Manchester,Manchester M139PL,UK)
出处
《高压物理学报》
EI
CAS
CSCD
北大核心
2021年第1期139-150,共12页
Chinese Journal of High Pressure Physics
关键词
表面组装器件
晶体振荡器
冲击环境
冲击响应谱
损伤边界
有限元
surface mounted device
crystal oscillator
shock environment
shock response spectrum
damage boundary
finite element
