期刊文献+

水银血压计量值比对及结果分析 被引量:4

Measurement Comparison and Result Analysis of Mercury Sphygmomanometers
原文传递
导出
摘要 为了客观、公正、科学地反映目前广西壮族自治区血压计计量的发展现状,广西壮族自治区市场监督管理局组织开展了2019年度水银血压计计量标准量值比对工作。本次比对以广西壮族自治区计量检测研究院为主导实验室,全区10家市级计量技术机构参加比对。参考值采用主导实验室及所有参比实验室测量结果的加权平均法计算得到,利用归一化偏差En值进行比对结果的评价,以及对比对期间存在的问题进行分析并提出建议。 To objectively,fairly,and scientifically reflect the current development status of mercury sphygmomanometer measurement in Guangxi Zhuang Autonomous Region,the Market Supervision Administration of Guangxi Zhuang Autonomous Region organized the 2019 annual sphygmomanometer measurement standard value comparison work.The comparison was conducted by Guangxi Zhuang Autonomous Region Institute of Metrology&Test as the pilot laboratory,and 10 municipal metrology technical institutions of Guangxi participated in the comparison.The reference value was calculated by the weighted average method of the measurement results of the pilot laboratory and all participating laboratories.The Envalue of normalized error was used to evaluate the comparison results,as well as to analyze and make recommendations on the problems encountered.
作者 闭晓帆 范晓辉 陈盛标 黄逸鑫 金海鹰 梁茵 李敦勇 BI Xiaofan;FAN Xiaohui;CHEN Shengbiao;HUANG Yixin;JIN Haiying;LIANG Yin;LI Dunyong(Guangxi Zhuang Autonomous Region Institute of Metrology&Test,Nanning 530007,China)
出处 《计量科学与技术》 2020年第12期45-49,共5页 Metrology Science and Technology
关键词 水银血压计 量值比对 参考值 mercury sphygmomanometer measurement value comparison reference value
  • 相关文献

参考文献6

二级参考文献24

  • 1倪育才.测量不确定度理解与应用(二) 极差法和贝塞尔法之间的比较[J].中国计量,2004(8):78-79. 被引量:25
  • 2姚振波.医疗设备故障检修快速工作法探讨[J].医疗设备信息,2005,20(8):72-72. 被引量:12
  • 3李庆忠,李春燕.两种计量比对[J].计量技术,2006(3):42-44. 被引量:16
  • 4CIPM MRA (Mutual Recognition Agreement),2003
  • 5BIPM,Draft B:CCM key Comparison of 1 kg standard in stainless steel,1999,04
  • 6PTB Draft B:CCM key Comparison of multiples and submultiples of kilogram,2000,09
  • 7Mikes(Finland),Draft B:CCM key Comparison of 10-5 kN force standards,2004
  • 8Dr.A.Sawla,Dr.M.Peters,Synthesis report,EC-intercomparison of force transducer calibration between 7 countries,PTB,1987,07
  • 9Richard A.Mitchell,etc.Intercomparison of load cell verification tests performed by national laboratories of five countries,NIST,1989,08
  • 10李庆忠.关于全国数字指示轨道衡检定/校准比对的几点意见.中国计量科学研究院,2004,11

共引文献26

同被引文献25

引证文献4

二级引证文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部