期刊文献+

一种新型井下电缆湿式对接装置的研制与应用 被引量:1

Development and Application of A New Downhole Cable Wet Docking Assembly
下载PDF
导出
摘要 渤海PL油田多数采油井套管尺寸为177.8 mm,由于井眼尺寸限制致使常规分采工艺技术无法实施,而缆控式电泵智能分采工艺作为解决油井分层开发的新技术,同样存在管柱结构限制问题。为此,研制了一种新型井下电缆湿式对接装置。该装置由丢手连接器和电缆对接公头组成,施工时丢手连接器随分层管柱入井后投球液压实现丢手,电缆对接公头在电泵生产管柱携带下依靠管柱作用力与丢手连接器实现湿式对接,对接后满足井下高温、高压和高湿环境下的密封绝缘和供电通信。室内试验及现场应用结果表明,该装置设计合理、对接可靠,成功对接后可保持长期稳定供电与通信,满足该油田177.8 mm套管小井径油井的分层开发要求,可为小井径大斜度井及水平井的分层开发提供技术指导。 The production wells of PL oilfield mainly adopt 177.8 millimeters casing,and the restriction of borehole size leads to the failure of conventional separate-layered production process.However,cable-controlled intelligent separate-layered production technology which is a new technology to solve the separate-layered production of production wells,exists the problem of pipe string structure.In view of this,the downhole cable wet docking assembly has been developed.The assembly is composed of release connector and cable docking pin.In operation,the release connector can be released by hydraulic ball after the separate-layered string has been run into well.The cable butt male is carried by the production string of electric pump to realize wet docking with the release connector.After docking,it can meet the requirements of sealing insulation and power supply communication under high temperature,high pressure and high humidity environment underground.The results of indoor test and field application show that the assembly has reasonable design and reliable docking,can maintain long-term power supply and communication and meets separate-layered production requirements of 177.8 millimeters casing small wells in PL oilfield.The study results can provide technology support for separate-layered production of the large inclined well and horizontal well.
作者 山金城 代向辉 张延旭 陈祥 SHAN Jincheng;DAI Xianghui;ZHANG Yanxu;CHEN Xiang(CNOOC Pengbo Operation Company,Tianjin 300459,China;State Key Laboratory of Oil&Gas Reservoir Geology and Exploitation,Southwest Petroleum University,Chengdu,Sichuan 610500,China)
出处 《钻采工艺》 CAS 北大核心 2021年第1期99-101,共3页 Drilling & Production Technology
基金 中海石油(中国)有限公司科研项目“7″套管防砂完井电泵智能分采技术矿场应用研究”(编号:YXKY-2018-TJ-05)。
关键词 湿式对接装置 丢手连接器 电缆对接公头 智能分采 wet docking assembly released connector cable docking male intelligent separate-layered production
  • 相关文献

参考文献8

二级参考文献43

  • 1万平杰.湿接头水平井测井中的技术难点[J].测井技术,2005,29(3):268-271. 被引量:16
  • 2巨亚锋,王治国,马红星,陈伟,金晓红,龚雪梅.分层注水井智能测试调配技术试验评价[J].油气井测试,2006,15(6):51-52. 被引量:23
  • 3刘永胜.注水井分层智能联动调配系统[J].石油仪器,2007,21(1):62-63. 被引量:28
  • 4http://www.halliburton.com.
  • 5成大先.机械设计手册[M].北京:化学工业出版社,1998..
  • 6成大先,等.机械设计手册(第三版第一卷.第二卷)[M].北京:化学工业出版社出版,1998.
  • 7赵世臣.常用金属材料手册[M].北京:冶金工业出版社出版,1987.
  • 8成大先等.机械设计手册(第三版第二卷)[M].北京:化学工业出版社,1998.
  • 9张锡濂.小口径定向钻外钻进[J].国外地质勘探技术,1981,(1):53.
  • 10王斗秋.小口径可控定向钻进工艺技术设计与初步实践[J].探矿工程,1982,(6):16-17.

共引文献67

同被引文献17

引证文献1

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部