期刊文献+

国产双锥形光纤实现4kW单模激光输出 被引量:7

4-kW Single-Mode Laser Output Using Homemade Double-Tapered Fiber
原文传递
导出
摘要 基于自主研制的双锥形掺镱双包层光纤,开展了全光纤高功率光纤激光放大实验。激光系统实现了中心波长为1080 nm、最高功率为4 kW的单模激光输出,其光光效率和斜率效率分别为82%和83%,质量因子(M^(2))为1.33,拉曼抑制比为44 dB。实验结果表明,双锥形光纤具有同时提高非线性效应和模式不稳定性效应阈值的优势,有利于进一步提升高光束质量光纤激光器的输出功率。 Objective In recent years,there has been a rapid progress in the development of high-power fiber lasers,which are widely used in the fields of laser marking and material processing as well as numerous industrial applications.The main factors that limit the output power of fiber lasers are the mode instability and nonlinear effects,including stimulated Raman scattering and stimulated Brillouin scattering.To suppress these nonlinearities,the core size of large mode area active fibers should be increased.However,this may lead to the degradation of beam quality.The core diameter of tapered fibers gradually increases as the length increases,therefore suppressing the nonlinear effects.Moreover,the tapered area,which satisfies the adiabatic taper principle,facilitates in achieving excellent beam quality.Tapered active fibers have been used in various applications such as continuous-wave fiber laser oscillators or amplifiers,ultrafast laser systems,and single-frequency fiber amplifiers.In early 2020,researchers from National University of Defense Technology proposed the Yb-doped double-tapered double-cladding fiber(DTDCF),which consists of a thin-core section at both ends and a large-core section in the middle.In the present study,all-fiber high-power laser amplification is performed based on the self-fabricated Yb-doped DT-DCF.The laser system achieves a single-mode laser output with a maximum power of 4 kW and a mass factor M^(2) of 1.33.Methods We construct a master oscillator power amplifier system based on the homemade DT-DCF.This system is21-m long and has small-core and large-core sections with core/cladding diameters of 22/413 and 32/600 mm,respectively.Fusion splices connect all the components.The seed has a center wavelength of 1080 nm and a output power of 103 W.After passing through the cladding light striper(CLS),the seed light is injected into the amplifier.Subsequently,bidirectional pumping is applied to laser amplification.Seven laser diode(LD)modules with a center wavelength of 976 nm are divided into two groups comprising two and five modules to pump the DT-DCF through the forward and backward couplers,respectively.After the amplification stage,the CLS is utilized to strip out the residual pump power and the laser is finally output to free space through the endcap for the measurement of power,spectrum,and beam quality.Results and Discussion The output power increases linearly with the pumping power.When the pumping power is4.75 kW,the output power reaches 4 kW.The corresponding optical efficiency and slope efficiency are 82%and83%,respectively.The M^(2) at the highest power is 1.33[Fig.3(a)],exhibiting the single-mode output characteristic of the system.Mode instability limits further power scaling of the single-mode output.If the pump power increases to over 4.75 kW,time domain fluctuation of kHz can be observed,indicating the initiation of mode instability.The output laser has a center wavelength of 1080 nm,and its spectrum broadens as the output power increases.For the spectrum under the highest output power,the Raman suppression ratio reaches up to 44 dB[Fig.3(b)],demonstrating the ability of the DT-DCF to inhibit the nonlinear effects.Conclusions In summary,we have established a 1080-nm all-fiber amplifier based on DT-DCF.This amplifier can achieve a 4-kW single-mode output laser with a slope efficiency of 83%and M^(2) of 1.33.Our results indicate that the DT-DCF can simultaneously suppress the nonlinear effects and transverse mode instability,thus providing a beneficial reference for further power scaling of single-mode fiber lasers.
作者 安毅 杨欢 肖虎 陈潇 黄良金 潘志勇 王小林 奚小明 马鹏飞 王泽锋 周朴 许晓军 姜宗福 陈金宝 An YiYang Huan;Xiao Hu;Chen XiaoHuang Liangjin;Pan Zhiyong;Wang Xiaolin;Xi Xiaoming;Ma Pengfei;Wang Zefeng;Zhou Pu;Xu Xiaojun;Jiang Zongfu;Chen Jinbao(College of Advanced Interdisciplinary Studies,National University of Defense Technology,Changsha,Hunan 410073,China;Hunan Provincial Key Laboratory of High Energy Laser Technology,Changsha,Hunan 410073,China)
出处 《中国激光》 EI CAS CSCD 北大核心 2021年第1期204-207,共4页 Chinese Journal of Lasers
基金 湖南创新型省份建设专项(2019RS3018) 湖南省自然科学基金创新研究群体项目(2019JJ10005)。
关键词 激光器 高功率光纤激光器 锥形光纤 单模 受激拉曼散射 模式不稳定 lasers high-power fiber laser tapered fiber single mode stimulated Raman scattering mode instability
  • 相关文献

参考文献5

二级参考文献11

共引文献32

同被引文献67

引证文献7

二级引证文献15

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部