期刊文献+

苏里格致密气水平井完井压裂技术对比研究 被引量:8

Comparative study on the completion and fracturing technologies used for tight-gas horizontal wells in Sulige Gas Field
下载PDF
导出
摘要 长庆苏里格气田是典型的致密砂岩气田,水平井开发技术从2008年以来通过技术攻关得到了一定规模的应用。早期受工艺技术限制的影响,现场主要应用的是裸眼完井不动管柱水力喷射分段压裂技术,后期为了提高致密气水平井单井产量,优化完井方式形成了固井完井桥射联作多簇射孔分段压裂技术,压裂增产效果提升显著。通过对2种完井方式的特点、应用情况进行对比分析,对近10年来的开发效果进行了定量评价,总结了苏里格致密气田水平井开发的经验,为气田后期开发及国内类似气藏开发提供依据。 Sulige Gas Field of Changqing Oilfield Company is a typical tight sandstone gas field,where horizontal well development technology has been applied to a certain scale by virtue of technological research since 2008.In the early stage,due to the technological restriction,the open hole completion and one-trip hydraulic jet staged fracturing technology is mainly adopted to meet the field demands.In the late stage,in order to improve the single-well production rate of tight-gas horizontal wells,the completion mode is optimized to form the cementing,completion and combined bridge plug and multi-cluster perforation fracturing technology,which improves the fracturing stimulation effect significantly.Two completion modes were comparatively analyzed from the aspects of characteristics and application situations,their development effects in the last ten years were quantitatively evaluated,and the experience of horizontal well development in Sulige tight gas field was summarized,so as to provide the basis for the development of Sulige Gas Field in the late stage and the development of similar gas reservoirs at home.
作者 李宪文 李喆 肖元相 陈宝春 张燕明 史华 LI Xianwen;LI Zhe;XIAO Yuanxiang;CHEN Baochun;ZHANG Yanming;SHI Hua(National Engineering Laboratory of Low-permeability Oil&Gas Exploration and Development,Xi’an 710018,Shaanxi,China;Oil and Gas Technology Institute,PetroChina Changqing Oilfield Company,Xi’an 710018,Shaanxi,China)
出处 《石油钻采工艺》 CAS 北大核心 2021年第1期48-53,共6页 Oil Drilling & Production Technology
基金 国家科技重大专项“鄂尔多斯盆地大型低渗透岩性地层油气藏开发示范工程”(编号:2016ZX05050)。
关键词 致密气 水平井 裸眼完井 固井完井 分段压裂 tight gas horizontal well open hole completion cementing and completion staged fracturing
  • 相关文献

参考文献7

二级参考文献74

  • 1李根生,黄中伟,张德斌,田仲强,张满库.高压水射流与化学剂复合解堵工艺的机理及应用[J].石油学报,2005,26(1):96-99. 被引量:18
  • 2易灿,李根生,郭春阳,张定国.自振空化射流改善油层特性实验研究及现场应用[J].石油学报,2006,27(1):81-84. 被引量:11
  • 3袁光杰,申瑞臣,田中兰,袁进平,高彦尊,路立君,魏东吼,杨海军.快速造腔技术的研究及现场应用[J].石油学报,2006,27(4):139-142. 被引量:19
  • 4唐川林,胡东,裴江红.自激振荡脉冲射流喷嘴频率特性实验研究[J].石油学报,2007,28(4):122-125. 被引量:42
  • 5Li Gensheng,Niu Jilei,Song Jian,et al.Abrasive water jet perforation:An alternative approach to enhance oil production[J].Petrol.Sci.Technol.,2004,22(5):491-504.
  • 6Qu Hai,Li Gensheng,Huang Zhongwei,et al.The boosting mechanism and effects in cavity during hydrajet fracturing process[J].Petrol.Sci.Technol.,2010,28(13):1345-1350.
  • 7Jessica H,Rafael H.Pinpoint fracture using a multiple-cutting process[R].SPE 122949,2009.
  • 8Huang Zhongwei,Niu Jilei,Li Gensheng,et al.Surface experiment of abrasive water jet perforation[J].Petrol.Sci.Technol.,2008,26(6):726-733.
  • 9张德彪 侯军 马卫国 等.防突结构对封隔器密封性能的影响分析.石油机械,2010,38(12):53-55.
  • 10SURJAATMADJA J, GRUNDMANN S R, MCDANIEL B, et al. Hydrajet fracturing: an effective method for placing many fractures in openhole horizontal wells [ C ] . SPE48 856, 1998.

共引文献261

同被引文献167

引证文献8

二级引证文献40

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部