期刊文献+

4.0 Mt/a蜡油加氢裂化装置开工标定 被引量:3

Start-up and performance tests ofa 4.0 MM TPY VGO Unicracking^(TM) unit
下载PDF
导出
摘要 浙江石油化工有限公司4.0 Mt/a的蜡油加氢裂化装置(含C 5正异构分离单元),采用UOP Unicracking TM加氢裂化技术,装填加氢精制催化剂HYT-6219-1.3T,HYT-6219-1.3Q与加氢裂化催化剂HC-185LT,是国内目前规模最大的单段串联一次通过工艺流程装置。装置开工后一直维持95%以上负荷稳定运行,重石脑油收率27.67%,芳烃潜含量58.3%,分馏增产3号喷气燃料收率达到23.74%。催化剂在低反应温度下活性和选择性较好,单程转化率83.35%,C+5收率达到94.42%,综合能耗1652.41 MJ/t,产品分布合理,质量达到设计要求。 UOP’s Unicracking TM technology has been licensed for the 4.0 MM TPY VGO hydrocracking unit(including C 5 normal isomer separation unit)of Zhejiang Petroleum&Chemical Co.,Ltd.,which loads hydrotreating catalysts HYT-6219-1.3T/HYT-6219-1.3Q and hydrocracking catalyst HC-185LT.It is the largest single-stage series once-through process flow unit in China.The unit has been operating stably at over 95%of its design capacity after the start-up.The yield of heavy naphtha is 27.67%,the aromatic potential content is 58.3%,the yield of jet fuel is 23.74%,the catalyst has good activity and selectivity at low reaction temperature,the single pass conversion is 83.35%,the C+5 yield is 94.42%,and the comprehensive energy consumption is 1,652.41 MJ/t.The product distribution is reasonable,and the quality meets the design requirements.
作者 郭振刚 Guo Zhengang(Zhejiang Petroleum&Chemical Co.,Ltd.,Zhoushan,Zhejiang 316200)
出处 《炼油技术与工程》 CAS 2021年第5期12-16,共5页 Petroleum Refinery Engineering
关键词 蜡油加氢裂化装置 重石脑油 开工 标定 能耗 VGO Unicracking TM unit heavy naphtha start-up calibration energy consumption
  • 相关文献

参考文献3

二级参考文献9

共引文献11

同被引文献20

引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部