期刊文献+

核电用12Cr13马氏体不锈钢的热变形行为及可挤性 被引量:1

Thermal Deformation Behavior and Extrudability of 12Cr13 Martensitic Stainless Steel for Nuclear Power
下载PDF
导出
摘要 以核电用12Cr13马氏体不锈钢为研究对象,进行Gleeble热模拟等轴热压缩实验,研究材料的热变形行为;结合DEFORM-2D有限元软件分析高应变速率下材料小口径厚壁管的可挤性,且在卧式42 MN挤压机上进行试制试验。结果表明:流变应力与变形温度和应变速率分别呈负相关和正相关关系,高应变速率下变形温升显著,促进材料发生动态再结晶;随挤压速度的提高,最大应变速率显著提高,挤压坯料的温升显著,流变抗力逐步增加;结合实际工况,根据实验和有限元分析结果,成功挤出合格的核电用12Cr13马氏体不锈钢小口径厚壁管坯。 Taking 12Cr13 martensite stainless steel for nuclear power as the research object,the thermal deformation behavior of the material was investigated by high temperature compression tests on a Gleeble thermal-mechanical simulator.DEFORM-2D finite element software was used to analyze the extrudability of small diameter thick wall pipe under high strain rate,and a trial production test was carried out on a horizontal 42MNextruder.The results show that the flow stress changes are negatively and positively correlated with deformation temperature and strain rate,respectively.The deformation temperature rises significantly under the high strain rate,which promotes the dynamic recrystallization of the material.With the increase of extrusion speed,the maximum strain rate,temperature rise of billet and rheological resistance increase significantly.The 12Cr13 small diameter thick wall tube billet is successfully extruded,according to the experimental and finite element analysis results combined with the working conditions.
作者 李光恒 王宝顺 何宜柱 LI Guangheng;WANG Baoshun;HEYizhu(School of Materials Science and Engineering,Anhui University of Technology,Maanshan 243032,China;Zhejiang Jiuli Hi-tech Metals Co.,Ltd.,Huzhou 313028,China)
出处 《安徽工业大学学报(自然科学版)》 CAS 2021年第2期125-132,共8页 Journal of Anhui University of Technology(Natural Science)
基金 国家重点研发计划项目(2017YFB0304702)。
关键词 核电用钢 应变速率 有限元分析 热挤压 nuclear power steel strain rate finite element analysis hot extrusion
  • 相关文献

参考文献11

二级参考文献80

共引文献57

同被引文献14

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部