摘要
The recycling of spent LiFePO_(4)batteries has received extensive attention due to its environmental impact and economic benefit.In the pretreatment process of spent LiFePO_(4)batteries,the separation of active materials and current collectors determines the difficulty of the re-covery process and product quality.In this work,a facile and efficient pretreatment process is first proposed.After only freezing the electrode pieces and immersing them in boiling water,LiFePO_(4)materials were peeled from the Al foil.Then,after roasting under an inert atmosphere and sieving,all the cathode and anode active materials were easily and efficiently separated from the Al and Cu foils.The active materials were subjected to acid leaching,and the leaching solution was further used to prepare FePO_(4)and Li_(2)CO_(3).Finally,the battery-grade FePO_(4)and Li_(2)CO_(3)were used to re-synthesize LiFePO_(4)/C via the carbon thermal reduction method.The discharge capacities of re-synthesized LiFePO_(4)/C cathode were 144.2,139.0,133.2,125.5,and 110.5 mA·h·g−1 at rates of 0.1,0.5,1,2,and 5 C,which satisfies the requirement for middle-end LiFePO_(4)batteries.The whole process is environmental and has great potential for industrial-scale recycling of spent lithium-ion batteries.
基金
This work was financially supported by the Key-Area Research and Development Program of Guangdong Province,China(No.2020B090919003)
the National Natural Science Foundation of China(Nos.51834008,51874040,and U1802253)
the Fundamental Research Funds for the Central Universities(No.FRF-TP-18-020A3).
