期刊文献+

FER分子筛Lewis酸中心对异丁烯催化转化的影响 被引量:2

Effect of Lewis acid sites of FER zeolite on catalytic transformation of isobutene
下载PDF
导出
摘要 采用不同浓度六氟硅酸铵(AHFS)对FER型分子筛进行同晶置换改性,制备了一系列具有不同酸类型、酸密度及可接近性等特征的改性FER分子筛样品,运用XRD、N_(2)吸附-脱附等温线等方法对其织构性质进行表征,通过NH_(3)-TPD和Py-FTIR关联改性FER分子筛的酸性质,并结合反应评价系统探究了改性FER分子筛酸中心与丁烯(1-丁烯、异丁烯)骨架异构化反应间的构效关系。结果表明,根据产物收率确定,以1-丁烯和异丁烯分别作为原料时其骨架异构化的最佳反应温度均为350℃,以异丁烯作为原料时副反应更为明显。在脱铝过程中,由于脱铝剂和分子筛中的非骨架铝羟基物种的相互作用,产生了强弱不同的两种新Lewis酸中心,在反应过程中上述两种Lewis酸中心促进了异丁烯齐聚-裂化反应的进行,进而降低了主反应的选择性。 A series of modified FER zeolite samples with different acid types,acid density and accessibility were prepared by using different concentrations of ammonium hexafluorosilicate(AHFS)for isomorphous substitution.The texture properties were characterized by XRD and N_(2) adsorption isotherms.And the acid properties were characterized by NH_(3)-TPD and Py-FTIR.The results showed that when 1-butene and isobutene were respectively used as raw materials,the optimal reaction temperature for skeleton isomerization was 350℃,and the side reaction was more obvious when isobutene was used as raw material.During the dealumination process,two new Lewis acid sites with different strength were generated,due to the interaction between the dealumination agent and the extra framework aluminum hydroxyl species on the zeolite.During the reaction,the above two Lewis acid sites promoted the oligomerization-cracking of isobutene,thereby,reducing the selectivity of the main reaction.
作者 杨佳宝 惠宇 秦玉才 张晓彤 王焕 宋丽娟 YANG Jia-bao;HUI Yu;QIN Yu-cai;ZHANG Xiao-tong;WANG Huan;SONG Li-juan(Key Laboratory of Petrochemical Catalytic Science and Technology,Liaoning Petrochemical University,Fushun 113001,China;College of Chemistry and Chemical Engineering,China University of Petroleum(East China),Qingdao 266555,China)
出处 《燃料化学学报》 EI CAS CSCD 北大核心 2021年第9期1326-1335,共10页 Journal of Fuel Chemistry and Technology
基金 国家自然科学基金(U20A20120,21902068)资助。
关键词 分子筛 催化作用 FER 丁烯 LEWIS酸 zeolite catalysis FER butene Lewis acid
  • 相关文献

参考文献6

二级参考文献79

  • 1贾立山.汽油添加剂醚类的生产工艺[J].石油化工,1995,24(1):57-63. 被引量:5
  • 2赵毓璋.增加醚类生产的烯烃骨架异构化技术[J].炼油设计,1996,26(1):1-5. 被引量:3
  • 3Bittrich Hans-Heiner, Feldhaus Reinhard, et al. Lower Olefins by Thermal Cracking of High-boiling Hydrocarbon Fraction Get (East), DD 233584. 1986.
  • 4Weber Manfred ,Becker Karl,et al. Preparation of Non-abrasive Catalysts for Themal Catalytic Cracking Process. Ger (East), DD 238735. 1986.
  • 5Weber Manfred,Becker Karl,et al. Catalysts for Pyrolysis of Heavy Hydrocarbon Fraction. Ger (East), DD 248516. 1986.
  • 6Kikuchi Hidekazu ,Sekizawa Kazuhiko. Olefins. Jpn Kokai Tokkyo Koho, JP60178830. 1990.
  • 7Wiellers A F H, Vaakamp M,et al. Relation Between Properties and Performance of Zeolites in Paraffin Cracking. Journal of Catalysis, 1991,127:51~66.
  • 8Corma A, Orchilles A V, et al. Formation of Products Responsible for Motor and Research Octane of Gasolines Produced by Cracking. Journal of Catalysis, 1989,115 : 551 ~ 566.
  • 9Tseng-Chang Tsai, Hsiang-Yun Kung. Effects of Acid Strength of Fluid Crecking Catalysts on Redid Cracking Operation. Appl Catal, 1989,50:1~13.
  • 10Haag W O, Dessau R M. Duality of Mechanism of Acid-Catalyzed Paraffin Cracking. 8^th Int Congr Catal Proc, Berlin,1984,2:305~316.

共引文献55

同被引文献11

引证文献2

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部